SnBi pájecí pasta a vliv reaktivních nanočástic
Loading...
Date
Authors
Rychlý, Ivo
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato práce se zabývá rešerší vlivu reaktivních nanočástic, především měděných a stříbrných, na vlastnosti bezolovnatých pájecích past. Popisuje základní zkoušky prováděné na pájecích pastách podle standardu IPC-TM-650. V praktické části práce se připravuje pájecí pasta SnBi a měří se její viskozita. Do SnBi pasty se přidávají různé koncentrace nanočástic slitiny stříbra a mědi. Na těchto pastách se provádějí zkoušky IPC a mechanické a odporové zkoušky na deskách plošných spojů a zjišťuje se, jak přidané nanočástice ovlivnily vlastnosti těchto pájecích past.
This work deals with effects of nanoparticles, mainly copper and silver, on properities of lead-free solder pastes. It describes basic tests done on solder pastes according to IPC-TM-650 standards. In practical section this work focuses on the preparation of Sn-Bi solder paste and the measuring of viscosity. After that different concentrations of silver copper alloy nanoparticles are added to the SnBi solder paste. These solder pastes are tested by the IPC standarts and mechanical and resistive tests are done on printed circuit boards where the effects of mixed in nanoparticles are observed.
This work deals with effects of nanoparticles, mainly copper and silver, on properities of lead-free solder pastes. It describes basic tests done on solder pastes according to IPC-TM-650 standards. In practical section this work focuses on the preparation of Sn-Bi solder paste and the measuring of viscosity. After that different concentrations of silver copper alloy nanoparticles are added to the SnBi solder paste. These solder pastes are tested by the IPC standarts and mechanical and resistive tests are done on printed circuit boards where the effects of mixed in nanoparticles are observed.
Description
Citation
RYCHLÝ, I. SnBi pájecí pasta a vliv reaktivních nanočástic [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2018.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Elektrotechnická výroba a materiálové inženýrství
Comittee
prof. Ing. Jiří Kazelle, CSc. (předseda)
doc. Ing. Vítězslav Novák, Ph.D. (místopředseda)
Ing. Ondřej Čech, Ph.D. (člen)
Ing. Bohuslav Res, CSc. (člen)
doc. Ing. Tomáš Kazda, Ph.D. (člen)
Date of acceptance
2018-06-06
Defence
Student seznámil státní zkušební komisi s cíli a řešením závěrečné vysokoškolské práce a zodpověděl otázky a připomínky oponenta.
Výroba nanočástic je možná více jak dvěma metodami, uveďte nějaké další.
Jaký rozměr má viskozita?
Jaké vlastnosti se přídavkem nanočástic zlepšily?
Jaký byl hlavní důvod přidání nanočástic do pájecí pasty?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení