Design of LTCC-based Ceramic Structure for Chemical Microreactor
dc.contributor.author | Belavic, Darko | |
dc.contributor.author | Hrovat, Marko | |
dc.contributor.author | Dolanc, Gregor | |
dc.contributor.author | Zarnik, Marina Santo | |
dc.contributor.author | Holc, Janez | |
dc.contributor.author | Makarovic, Kostja | |
dc.coverage.issue | 1 | cs |
dc.coverage.volume | 21 | cs |
dc.date.accessioned | 2015-01-22T09:23:57Z | |
dc.date.available | 2015-01-22T09:23:57Z | |
dc.date.issued | 2012-04 | cs |
dc.description.abstract | The design of ceramic chemical microreactor for the production of hydrogen needed in portable polymer-electrolyte membrane (PEM) fuel cells is presented. The microreactor was developed for the steam reforming of liquid fuels with water into hydrogen. The complex three-dimensional ceramic structure of the microreactor includes evaporator(s), mixer(s), reformer and combustor. Low-temperature co-fired ceramic (LTCC) technology was used to fabricate the ceramic structures with buried cavities and channels, and thick-film technology was used to make electrical heaters, temperature sensors and pressure sensors. The final 3D ceramic structure consists of 45 LTCC tapes. The dimensions of the structure are 75 × 41 × 9 mm3 and the weight is about 73 g. | en |
dc.format | text | cs |
dc.format.extent | 195-200 | cs |
dc.format.mimetype | application/pdf | en |
dc.identifier.citation | Radioengineering. 2012, vol. 21, č. 1, s. 195-200. ISSN 1210-2512 | cs |
dc.identifier.issn | 1210-2512 | |
dc.identifier.uri | http://hdl.handle.net/11012/37029 | |
dc.language.iso | en | cs |
dc.publisher | Společnost pro radioelektronické inženýrství | cs |
dc.relation.ispartof | Radioengineering | cs |
dc.relation.uri | http://www.radioeng.cz/fulltexts/2012/12_01_0195_0200.pdf | cs |
dc.rights | Creative Commons Attribution 3.0 Unported License | en |
dc.rights.access | openAccess | en |
dc.rights.uri | http://creativecommons.org/licenses/by/3.0/ | en |
dc.subject | Chemical microreactor | en |
dc.subject | LTCC ceramic | en |
dc.subject | 3D structure | en |
dc.title | Design of LTCC-based Ceramic Structure for Chemical Microreactor | en |
dc.type.driver | article | en |
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |
eprints.affiliatedInstitution.faculty | Fakulta eletrotechniky a komunikačních technologií | cs |