Design of LTCC-based Ceramic Structure for Chemical Microreactor
Loading...
Date
Authors
Belavic, Darko
Hrovat, Marko
Dolanc, Gregor
Zarnik, Marina Santo
Holc, Janez
Makarovic, Kostja
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Společnost pro radioelektronické inženýrství
ORCID
Abstract
The design of ceramic chemical microreactor for the production of hydrogen needed in portable polymer-electrolyte membrane (PEM) fuel cells is presented. The microreactor was developed for the steam reforming of liquid fuels with water into hydrogen. The complex three-dimensional ceramic structure of the microreactor includes evaporator(s), mixer(s), reformer and combustor. Low-temperature co-fired ceramic (LTCC) technology was used to fabricate the ceramic structures with buried cavities and channels, and thick-film technology was used to make electrical heaters, temperature sensors and pressure sensors. The final 3D ceramic structure consists of 45 LTCC tapes. The dimensions of the structure are 75 × 41 × 9 mm3 and the weight is about 73 g.
Description
Keywords
Citation
Radioengineering. 2012, vol. 21, č. 1, s. 195-200. ISSN 1210-2512
http://www.radioeng.cz/fulltexts/2012/12_01_0195_0200.pdf
http://www.radioeng.cz/fulltexts/2012/12_01_0195_0200.pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
DOI
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwised noted, this item's license is described as Creative Commons Attribution 3.0 Unported License