Návrh horizontálního štípacího zařízení na dřevo
Loading...
Date
Authors
Dušek, Vilém
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato bakalářská práce se zabývá konstrukčním návrhem a bezpečnostními výpočty horizontální hydraulické štípačky za traktor. Teoretická část se zaměřuje na popis funkce štípaček na dřevo, kde je stručně popsán základní princip dělení dřeva štípacím klínem. Zbytek teoretické části rozděluje horizontální štípačky na dřevo do několika podskupin podle pěti hlavních kritérií mého výběru. V praktické části následuje výpočet pomocných veličin hydraulického obvodu pro zjištění maximální možné síly působící na rám. Navazuje výpočtová část hlavních namáhaných dílců, tj. rámu, svárů a šroubů. Na konci praktické části byl na základě provedených výpočtů vytvořen 3D model v programu Inventor.
This bachelor's thesis focuses on the design and safety calculations of a horizontal hydraulic log splitting machine for a tractor. The theoretical part addresses the description of the function of wood splitting machines, where the basic principle of splitting wood with a splitting wedge is briefly described. The rest of the theoretical part divides horizontal wood splitters into several subgroups according to five main criteria of my choosing. The practical part follows with the calculation of supporting variables of the hydraulic circuit to determine the maximum possible force exerted on the frame. This is followed by the calculation part of the main stressed parts, i.e. the frame, welds and bolts. At the end of the practical part, a 3D model was created in the Inventor program based on the calculations performed.
This bachelor's thesis focuses on the design and safety calculations of a horizontal hydraulic log splitting machine for a tractor. The theoretical part addresses the description of the function of wood splitting machines, where the basic principle of splitting wood with a splitting wedge is briefly described. The rest of the theoretical part divides horizontal wood splitters into several subgroups according to five main criteria of my choosing. The practical part follows with the calculation of supporting variables of the hydraulic circuit to determine the maximum possible force exerted on the frame. This is followed by the calculation part of the main stressed parts, i.e. the frame, welds and bolts. At the end of the practical part, a 3D model was created in the Inventor program based on the calculations performed.
Description
Citation
DUŠEK, V. Návrh horizontálního štípacího zařízení na dřevo [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2025.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Stavba strojů a zařízení
Comittee
doc. Ing. Robert Brázda, Ph.D. (předseda)
prof. Ing. Miroslav Rousek, CSc. (místopředseda)
Ing. Přemysl Pokorný, Ph.D. (člen)
Ing. Lukáš Zeizinger, Ph.D. (člen)
Ing. Jiří Hloska, Ph.D. (člen)
Date of acceptance
2025-06-12
Defence
Student prezentoval svou závěrečnou práci a odpověděl na otázky vedoucího i oponenta.
Dále odpovídal na dotazy členů zkušební komise a to následovně:
Vzájemná poloha břitů při použití štípacího kříže.
- odpověděl
Jednotky tlaku.
- odpověděl
Geometrie břitu pro štípání na více než 2 části.
- odpověděl
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení