Stav 3D tisku a jeho využití v České republice
Loading...
Date
Authors
Kopecký, Miroslav
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
3D tisk je široce uznávaná a zavedená technika, která umožňuje výrobu složitých struktur s nízkými výrobními náklady a snadnou škálovatelností. V této studii byl proveden komplexní přehled aplikací 3D tisku v různých průmyslových odvětvích v České republice. První část výzkumu poskytuje přehled dostupných technik 3D tisku spolu s porovnáním příslušných parametrů tisku a pořizovacích nákladů. Další část pokračuje popisem praktických aplikací vysvětlených metod 3D tisku v průmyslových odvětvích v České republice. Konkrétně jsou podrobněji rozebrány aplikace ve stavebnictví, automobilovém průmyslu, školství a zdravotnictví. Na posledně jmenovanou je pak zaměřena praktická část práce, kde je vyrobena zdravotnická pomůcka. Konkrétně je metodou tisku Fused Filament Fabrication (FFF) a Stereolitografie (SLA) vyrobena balanční deska pro trénink propriocepce dolních končetin jako cenově výhodná alternativa ke komerčně dostupnému výrobku. Srovnáním fyzikálních měření bylo zjištěno, že metoda FFF poskytuje přesnější výtisky. Tento výzkum poukazuje na potenciál 3D tisku při poskytování zdravotnických pomůcek na míru s vyšší přesností a nabízí slibnou cestu pro budoucí vývoj.
3D printing is a widely recognized and well established technique that enables the fabrication of complex structures with low production cost and easy scalability. In this study was conducted a comprehensive review of the applications of 3D printing in various industries in the Czech Republic. The first part of the research provides a summary of the different 3D printing techniques available, along with a comparison of relevant printing parameters and acquisition costs. The next part continues with description of the practical applications of the explained 3D printing methods in the Czech Republic industires. Namely, the applications in construction, automotive, education, and healthcare industries are discussed in more detail. The latter one is then brought into focus in the practical part of this work, where a medical aid is fabricated. Specifically the Fused Filament Fabrication (FFF) and Stereolithography (SLA) printing methods are used to fabricate a balance plates for lower limb proprioception training as a cost- effective alternative to commercially available product. Through a comparison of physical measurements, was found that the FFF method yielded more precise printouts. This research highlights the potential of 3D printing in delivering tailored medical aids, offering a promising avenue for future development.
3D printing is a widely recognized and well established technique that enables the fabrication of complex structures with low production cost and easy scalability. In this study was conducted a comprehensive review of the applications of 3D printing in various industries in the Czech Republic. The first part of the research provides a summary of the different 3D printing techniques available, along with a comparison of relevant printing parameters and acquisition costs. The next part continues with description of the practical applications of the explained 3D printing methods in the Czech Republic industires. Namely, the applications in construction, automotive, education, and healthcare industries are discussed in more detail. The latter one is then brought into focus in the practical part of this work, where a medical aid is fabricated. Specifically the Fused Filament Fabrication (FFF) and Stereolithography (SLA) printing methods are used to fabricate a balance plates for lower limb proprioception training as a cost- effective alternative to commercially available product. Through a comparison of physical measurements, was found that the FFF method yielded more precise printouts. This research highlights the potential of 3D printing in delivering tailored medical aids, offering a promising avenue for future development.
Description
Citation
KOPECKÝ, M. Stav 3D tisku a jeho využití v České republice [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
doc. Ing. Josef Sedlák, Ph.D. (předseda)
prof. Ing. Robert Čep, Ph.D. (místopředseda)
Ing. Oskar Zemčík, Ph.D. (člen)
Ing. Aleš Jaroš, Ph.D. (člen)
Ing. Vítězslav Svoboda, Ph.D. (člen)
Date of acceptance
2023-06-12
Defence
Bakalář seznámil komisi s obsahem a výsledky své bakalářské práce a zodpověděl otázky vedoucího, oponenta a dalších členů komise:
V průběhu obhajoby byly zodpovězeny následující doplňující otázky:
1. Na základě čeho jste volil směr tisku?
částečně zodpovězeno
2. Máte k tomu i nějaký návod, jak tyto pomůcky používat?
zodpovězeno
Otázky členů komise byly zodpovězeny.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení