Návrh CNC řezacího stroje odporovým drátem
Loading...
Date
Authors
Machač, Radim
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato diplomová práce se zabývá návrhem CNC řezacího stroje s odporovým drátem určeného pro dělení pěnových materiálů, jako je EPS a XPS polystyren. Úvodní část shrnuje historický vývoj a současný stav technologie řezání odporovým drátem. Následuje technický popis konstrukčních prvků a analýza dostupných strojů na trhu. V praktické části jsou provedeny experimenty s různými druhy odporových drátů a řeznými podmínkami. Výsledky těchto testů slouží jako podklad pro návrh vlastního zařízení. Pro výběr nejlepšího návrhu bylo využito multikriteriálního hodnocení pomocí Saatyho metody. Práce dále obsahuje výpočty, 3D model a výkresovou dokumentaci navrženého stroje. Výsledkem je návrh stroje s otočným stolem a dvanácti osami, který umožňuje přesné a flexibilní řezání složitých tvarů.
This thesis focuses on the design of a CNC hot wire foam cutter intended for cutting foam materials such as EPS and XPS polystyrene. The introductory section reviews the historical development and current state of hot-wire cutting technology. It is followed by a technical description of the machine components and a market analysis of existing devices. The experimental section includes tests of various resistance wires under different cutting conditions. The results serve as a basis for the design of a custom machine. To optimize the design, a multi-criteria evaluation using the Saaty method was employed. The thesis also includes calculations, a 3D model, and technical drawings. The outcome is a machine with a rotary table and twelve axes, allowing for precise and flexible cutting of complex shapes.
This thesis focuses on the design of a CNC hot wire foam cutter intended for cutting foam materials such as EPS and XPS polystyrene. The introductory section reviews the historical development and current state of hot-wire cutting technology. It is followed by a technical description of the machine components and a market analysis of existing devices. The experimental section includes tests of various resistance wires under different cutting conditions. The results serve as a basis for the design of a custom machine. To optimize the design, a multi-criteria evaluation using the Saaty method was employed. The thesis also includes calculations, a 3D model, and technical drawings. The outcome is a machine with a rotary table and twelve axes, allowing for precise and flexible cutting of complex shapes.
Description
Citation
MACHAČ, R. Návrh CNC řezacího stroje odporovým drátem [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2025.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
Ing. Tomáš Marek, Ph.D. (člen)
Ing. Jan Vetiška, Ph.D. (člen)
Ing. Jan Vlček (člen)
doc. Ing., Dipl.-Ing Michal Holub, Ph.D. (předseda)
Dr. h. c. prof. Ing. Ĺubomír Šooš, PhD. (místopředseda)
Ing. Rostislav Huzlík, Ph.D. (člen)
Date of acceptance
2025-06-17
Defence
Student seznámil členy komise se svou diplomovou prací na téma „Návrh CNC řezacího stroje odporovým drátem“.
Student zodpověděl otázky oponenta.
Otázky komise:
Jak je řešený napájecí přívod do řezacího drátu?
Jaká je požadovaná přesnost?
Jakým způsobem se bude upínat blok na otočném stole?
Jakým způsobem zajistíte rovnoběžnost portálů při konstrukci?
Jaké jsou limity vašeho řešení?
Student odpověděl na otázky komise se zaváháním.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení