Mechanická odezva při dynamickém zatěžování vrstev připravených technologií cold spray
Loading...
Date
Authors
Šprincl, Jan
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Cold spray je relativně novodobá technologie spadající do kategorie aditivní. Jedná se o povlakovací metodu, která nezpůsobuje natavení vstupního materiálu. To přináší mnoho výhod, mezi které patří zejména minimalizace ovlivnění výchozí struktury, absence vzniku tepelně ovlivněné oblasti anebo nemožnost vzájemné kombinace různých druhů materiálů. Tato práce se zabývá zejména depozicí titanového prášku Ti6Al4V, spolu s dalšími pro doplnění nebo modifikaci nástřiku, zlepšení jeho efektivity a zvýšení mechanických vlastností. Pro vyhodnocení vlastností byly použity balistické zkoušky, test tříbodovým ohybem, indentační metody, optická analýza pomocí světelné i elektronové mikroskopie, rentgenová difrakce, diferenciální skenovací kalorimetrie a ovlivnění struktury tepelným zpracováním. Tepelným zpracováním došlo k vytvoření zcela nových fází struktury, které měly za následek značný nárůst tvrdosti povlaku spolu se snížením jeho porozity. Došlo ke vzniku vysoce tvrdých fází na bázi TiC a Ti5Si3 v houževnaté matrici tvořené různým poměrem Ni-Ti a přidružených prvků – V, Al, Si. Závěrem jsou pak popsány návrhy pro případný budoucí vývoj tohoto materiálu. Jsou položeny předpoklady pro konkrétní zlepšení v oblasti jednotlivých metod a postupů použitých v této práci s ohledem na velmi perspektivní výhled do budoucna tohoto materiálu a jeho případné implementaci v reálné balistické ochraně, typicky ve vojenském průmyslu.
Cold spray is a relatively modern technology that falls into the additive category. It is a coating method that doesn´t cause the input material to melt. This brings many advantages, including the minimization of changes to the original structure, the absence of a heat-affected zone, and the possibility of combining different types of materials. This work mainly focuses on the deposition of Ti6Al4V titanium powder, along with other materials to supplement or modify the spray, improve its efficiency, and enhance its mechanical properties. Ballistic tests, three-point bending tests, indentation methods, optical analysis using light and electron microscopy, X-ray diffraction, differential scanning calorimetry, and the influence of thermal treatment on the structure were used to evaluate the properties. Thermal treatment led to the formation of completely new phases in the structure, resulting in a significant increase in the coating's hardness along with a reduction in its porosity. Highly hard phases based on TiC and Ti5Si3 were formed in a tough matrix composed of varying ratios of Ni-Ti and associated elements – V, Al, Si. Finally, proposals for potential future development of this material are described. Preconditions for specific improvements in the methods and procedures used in this work are laid out, with a very promising outlook for the future of this material and its potential implementation in real ballistic protection, typically in the military industry.
Cold spray is a relatively modern technology that falls into the additive category. It is a coating method that doesn´t cause the input material to melt. This brings many advantages, including the minimization of changes to the original structure, the absence of a heat-affected zone, and the possibility of combining different types of materials. This work mainly focuses on the deposition of Ti6Al4V titanium powder, along with other materials to supplement or modify the spray, improve its efficiency, and enhance its mechanical properties. Ballistic tests, three-point bending tests, indentation methods, optical analysis using light and electron microscopy, X-ray diffraction, differential scanning calorimetry, and the influence of thermal treatment on the structure were used to evaluate the properties. Thermal treatment led to the formation of completely new phases in the structure, resulting in a significant increase in the coating's hardness along with a reduction in its porosity. Highly hard phases based on TiC and Ti5Si3 were formed in a tough matrix composed of varying ratios of Ni-Ti and associated elements – V, Al, Si. Finally, proposals for potential future development of this material are described. Preconditions for specific improvements in the methods and procedures used in this work are laid out, with a very promising outlook for the future of this material and its potential implementation in real ballistic protection, typically in the military industry.
Description
Citation
ŠPRINCL, J. Mechanická odezva při dynamickém zatěžování vrstev připravených technologií cold spray [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Ing. Rudolf Foret, CSc. (člen)
prof. Mgr. Tomáš Kruml, CSc. (člen)
prof. Ing. Vlastimil Vodárek, CSc. (člen)
prof. Ing. Ivo Dlouhý, CSc. (předseda)
doc. Ing. Klára Částková, Ph.D. (místopředseda)
prof. RNDr. Karel Maca, Dr. (člen)
Date of acceptance
2024-06-12
Defence
Student prezentoval svou závěrečnou práci a odpověděl na otázky oponenta. Dále odpovídal na dotazy členů zkušební komise:
1) Platí obecně, že tvrdost ja hlavní parametr pro balistickou odolnost? - odpovězeno
2) S kým bylo v rámci experimentální části spolupracováno? - odpovězeno
3) Proč je výhoda, že není možné pro Cold Spray použít kombinaci materiálů? - odpovězeno
4) Co se dělo na rozhraní substrát/přechodová vrstva/nástřik při balistických testech? - odpovězeno
5) Prováděl autor samostatně analýzu SEM? Jaký byl použitý detektor pro analýzu? - odpovězeno
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení