Fotometrie a spektroradiometrie zapouzdřených LED čipů
Loading...
Date
Authors
Vysoudil, Martin
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato diplomová práce se zabývá zpracováním světelných a technických parametrů výkonových LED čipů klíčových pro jejich aplikaci do osvětlovacích soustav. Cílem práce je vytvoření laboratorního modelu pro měření kvalitativních a kvantitativních parametrů světelného výkonu vysoce svítivých LED v závislosti na vyzařovaném úhlu, s využitím kulového integrátoru 0,3m, goniometru a vláknového spektroradiometru/luxmetru. Goniometr je sestaven pomocí optomechanických dílů stavebnice firmy Thorlabs. Vlivem průchodu proudu se LED čipy značně ohřívají. Aby světelné parametry testovaného LED čipu nebyly ovlivňovány tímto teplem, je potřeba z čipu vytvořené teplo odvádět pomocí pasivního chladiče. Dalším částí diplomové práce je rekonstrukce staršího modelu kulového integrátoru. Rekonstrukce musí být provedena tak, aby bylo opět zajištěno dostačující chlazení testovaného LED zdroje. Světlo rozptýlené v kulovém integrátoru je vedeno optickým kabelem do spektroradiometru, kde jsou následně zaznamenávány jeho parametry. Druhým prvkem, použitým pro měření světla vytvořeného na LED zdroji, je fotočlánek. Kulový integrátor musí být vhodně upraven pro indikaci těchto dvou měřících prvků a zároveň splňovat určitou korektnost měření. V závěru budou porovnány výsledky měření s katalogovými hodnotami uváděnými výrobci.
This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.
This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.
Description
Keywords
výkonový LED čip, fotometrie, radiometrie, goniometr, kulový integrátor, světelný zdroj, chlazení LED, index podání barev, teplota chromatičnosti, účinnost, měrný výkon, svítidlo, power LED chip; photometry, radiometry, goniometer, spherical integrator, light source, LED cooling, color rendering index, color temperature, efficiency, Luminous efficacy, light
Citation
VYSOUDIL, M. Fotometrie a spektroradiometrie zapouzdřených LED čipů [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2012.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Elektroenergetika
Comittee
prof. Ing. Jiří Drápela, Ph.D. (předseda)
prof. Ing. Stanislav Rusek, CSc. (místopředseda)
doc. Ing. Ilona Lázničková, Ph.D. (člen)
doc. Ing. Petr Mastný, Ph.D. (člen)
prof. Ing. Karel Katovský, Ph.D. (člen)
doc. Ing. David Topolánek, Ph.D. (člen)
Ing. Jiří Holoubek (člen)
Ing. Jiří Ptáček, Ph.D. (člen)
Date of acceptance
2012-06-06
Defence
Student prezentoval svou práci s s praktickou ukázkou vyrobeného měřicí zařízení.
Vedoucí v hodnocení vytkl nedostatky v jednotlivých kapitolách. Oponent měl vytky k formálnímu zpracování práce.
Student neznal přesné odpovědi na všechny otázky oponenta. Komise položila doplňující dotazy, student na ně odpověděl správně.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení