Funkční vrstvy TiO2 na vlákenných strukturách
Loading...
Date
Authors
Bečár, Tomáš
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Táto diplomová práca sa zaoberá vytvorením funkčných vrstiev na vláknitých štruktúrach. Cieľom práce je naniesť film oxidu titaničitého na sklenené vlákna pre jeho využitie ako aditíva do olovených akumulátorov. Súčasťou práce je rešerš metód nanášania oxidu titaničitého na sklenený substrát, prehľad meracích a zaznamenávacích zariadení a štruktúrna analýza použitých materiálov. Výsledkom práce budú vytvorené experimenty nanášania oxidu titaničitého na filtračný papier a sklenené vlákna spolu s ich analýzou. Po vyhodnotení analýz bude nasledovať návrh využitia týchto funkčných vrstiev v možných aplikáciach.
This thesis deals with the formation of functional layers on fibrous structures. The aim of the thesis is to deposit a titanium dioxide film on glass fibres for its use as an additive in lead acid batteries. The work includes a survey of methods of titanium dioxide deposition on glass substrate, a review of measuring and recording equipment and a structural analysis of the materials used. As a result of the work, experiments of titanium dioxide deposition on filter paper and glass fibers will be developed along with their analysis. The evaluation of the analyses will be followed by a proposal for the use of these functional layers in possible applications.
This thesis deals with the formation of functional layers on fibrous structures. The aim of the thesis is to deposit a titanium dioxide film on glass fibres for its use as an additive in lead acid batteries. The work includes a survey of methods of titanium dioxide deposition on glass substrate, a review of measuring and recording equipment and a structural analysis of the materials used. As a result of the work, experiments of titanium dioxide deposition on filter paper and glass fibers will be developed along with their analysis. The evaluation of the analyses will be followed by a proposal for the use of these functional layers in possible applications.
Description
Citation
BEČÁR, T. Funkční vrstvy TiO2 na vlákenných strukturách [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2024.
Document type
Document version
Date of access to the full text
Language of document
sk
Study field
bez specializace
Comittee
doc. Ing. Petr Bača, Ph.D. (předseda)
Ing. Jiří Libich, Ph.D. (člen)
doc. Ing. Petr Vyroubal, Ph.D. (místopředseda)
Ing. Ladislav Chladil, Ph.D. (člen)
Ing. Pavel Čudek, Ph.D. (člen)
Date of acceptance
2024-06-04
Defence
Student seznámil státní zkušební komisi s cíli a řešením závěrečné vysokoškolské práce a zodpověděl otázky a připomínky oponenta.
Otázky komise k obhajobě:
1) Proč jste volil teplotu žíhání 300 °C
2) Co by se stalo v případě vyšší a nižší teploty?
3) Došlo by i bez žíhání k přichycení TiO2 na vlákna separátoru?
4) Zmiňujete lepší elektrickou vodivost anatasu oproti rutilu. Je to v případě separátoru žádoucí?
5) Jak dlouho trvá srážení TTIP? Je možné výsledou dobu zkrátit?
6) Jak vypadá skelný separátor před zahájením nanášení? Jakou má strukturu?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení