Pevnostní analýza konstrukce hydraulického zařízení
Loading...
Date
Authors
Burian, Martin
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato práce se zabývá pevnostní analýzou dvou nádrží hydraulických agregátů pomocí metody konečných prvků. Úvodní část je tvořena stručným popisem těchto zařízení a také popisem aktuálního řešení. Následuje rozbor silových účinků a zatěžovacích stavů. V další části je popsán výpočtový model a poté již samotné výsledky výpočtů. Na základě těchto výsledků je nakonec proveden návrh možných úprav za účelem zlepšení mechanických vlastností. Přílohou práce je pak výkresová dokumentace návrhu řešení. Práce byla vytvořena ve spolupráci s firmou Bosch Rexroth, spol. s r. o.
This thesis deals with the strength analysis of two tanks of hydraulic power units using finite element method. Introduction consists of a brief description of these units and description of a current solution. An analysis of force effects and load conditions follows. The next part describes the calculation model and then the calculation results. Based on these results to improve mechanical properties, a proposal is made. The attachment of this thesis is drawing documentation. The thesis was created in cooperation with Bosch Rexroth, spol. s r. o.
This thesis deals with the strength analysis of two tanks of hydraulic power units using finite element method. Introduction consists of a brief description of these units and description of a current solution. An analysis of force effects and load conditions follows. The next part describes the calculation model and then the calculation results. Based on these results to improve mechanical properties, a proposal is made. The attachment of this thesis is drawing documentation. The thesis was created in cooperation with Bosch Rexroth, spol. s r. o.
Description
Citation
BURIAN, M. Pevnostní analýza konstrukce hydraulického zařízení [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Miroslav Škopán, CSc. (předseda)
prof. Štefan Čorňák, Dr. (místopředseda)
doc. Ing. Robert Brázda, Ph.D. (člen)
Ing. Jiří Nezbeda (člen)
Ing. Martin Kubín, Ph.D. (člen)
Date of acceptance
2024-06-10
Defence
Student prezentoval svou závěrečnou práci a odpověděl na otázky vedoucího i oponenta.
Dále odpovídal na dotazy členů zkušební komise a to následovně:
1) Výpočty jste provedl pomocí software CREO Parametric a MSC Apex. Který software by jste doporučil a proč? - Odpověděl.
2) Jakou manipulaci předpokládáte s nádržemi? - Odpověděl.
3) Jaká bude rychlost manipulace a definice "nízká" rychlost manipulace? - Odpověděl.
4) Jak bz probíhala manipulace s plnou nádrží? - Odpověděl.
5) Výpočet MKP - komentář výsledků, singularity a svary (rozprava)? - Částečně odpověděl.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení