Výpočet tlakových ztrát spalinových kanálů s využitím matematického modelování
Loading...
Date
Authors
Suchý, Václav
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato diplomová práce se zabývá výpočtem tlakových ztrát v potrubní trase spalinovodu. V první části práce byla provedena literární rešerše týkajcí se vlastností spalin a dynamiky proudění. Součástí teoretického rozboru byla detailní studie prvků potrubní trasy s ohledem na důvody vzniku tlakové ztráty při proudění, výpočty odporových součinitelů a možné metody snížení ztrát. V praktické části byl vytvořen model výpočtu tlakových ztrát existující spalinové trasy kondenzační jednotky instalované ve spalovenském provozu. V závěru práce byl proveden návrh optimalizace této trasy s důrazem na snížení celkové tlakové ztráty. Optimalizací byla snížena tlaková ztráta zadané trasy z 3581 Pa na 2647 Pa, tedy o 26 % a potřebný příkon ventilátoru byl snížen z původních 225 kW na 166,5 kW.
This diploma thesis deals with the calculation of pressure losses in the flue gas ducts. First part of this work describes properties of flue gas and flow dynamics. Part of the theoretical analysis was detailed study of pipeline elements with emphasis on the reasons for the existence of pressure loss in the flow, calculations of the resistance coefficients and possible methods of reducing the losses. In the practical part, a model of the pressure loss calculation of the existing flue gas line installed in the incineration plant was created. At the end of the thesis a proposal for optimization of this route was made with emphasis on the reduction of the overall pressure loss. By optimization the pressure drop of the specified route was reduced from 3581 Pa to 2647 Pa, i.e by 26% and the required power input of the fan was reduced from 225 kW to 166,5 kW.
This diploma thesis deals with the calculation of pressure losses in the flue gas ducts. First part of this work describes properties of flue gas and flow dynamics. Part of the theoretical analysis was detailed study of pipeline elements with emphasis on the reasons for the existence of pressure loss in the flow, calculations of the resistance coefficients and possible methods of reducing the losses. In the practical part, a model of the pressure loss calculation of the existing flue gas line installed in the incineration plant was created. At the end of the thesis a proposal for optimization of this route was made with emphasis on the reduction of the overall pressure loss. By optimization the pressure drop of the specified route was reduced from 3581 Pa to 2647 Pa, i.e by 26% and the required power input of the fan was reduced from 225 kW to 166,5 kW.
Description
Citation
SUCHÝ, V. Výpočet tlakových ztrát spalinových kanálů s využitím matematického modelování [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2018.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Energetické inženýrství
Comittee
doc. Ing. Zdeněk Skála, CSc. (předseda)
doc. Ing. Marek Baláš, Ph.D. (místopředseda)
prof. Ing. Pavel Kolat, DrSc. (člen)
Ing. Mirko Hudeček, CSc. (člen)
prof. Ing. František Hrdlička, CSc. (člen)
Ing. Alojz Boko (člen)
doc. Ing. Tomáš Dlouhý, CSc. (člen)
Ing. Pavel Křemínský (člen)
prof. Ing. Pavel Noskievič, CSc. (člen)
Date of acceptance
2018-06-14
Defence
Zodpovězeny dotazy oponenta DP.
V rozpravě byly položeny tyto otázky:
Nehomogenní dvoufázové proudění.
Stlačitelnost spalin
Jaké jsou tolerance pro výpočet.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení