Možnosti využití 3D tisku v procesním průmyslu
Loading...
Date
Authors
Haltmar, Jakub
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato bakalářská práce se zabývá možnostmi využití aditivních technologií v oblasti procesního průmyslu, zvláště v oblasti tepelných výměníků (chladičů), membránové destilace a strukturované výplně. V první části přináší práce přehled materiálů a aditivních technologií využitých ve zmíněných procesních celcích. Další část je věnována konkrétním příkladům využití 3D tisku v procesních aplikacích a jejich srovnání s konvenčními výrobními technologiemi ve světě. Dále je poskytnut přehled podpořených projektů dle Informačního systému výzkumu, vývoje a inovací v této oblasti a nastíněna situace na trhu v ČR. V diskuzi jsou navržena doporučení vývoje aditivní výroby v procesním průmyslu. V řešené oblasti je nejčastěji dosaženo zlepšení procesů (účinnosti, výkonu či zcela nové aplikace) díky možnosti aditivní výroby produkovat složitou geometrii zvětšující funkční plochu při zachování zástavbových rozměrů a materiálů specifických pro procesní průmysl.
This bachelor thesis deals with the possibilities of using additive technologies in the process industry, especially in the field of heat exchangers (heat sinks), membrane distillation and structured packing. In the first part, the thesis provides an overview of the materials and additive technologies used in these process units. The next part is devoted to specific examples of the use of 3D printing in the process applications and their comparison with conventional manufacturing technologies in the world. Furthermore, an overview of supported projects according to the Research, Development and Innovation Information System projects and the market situation in the Czech Republic is outlined. Recommendations for the development of additive manufacturing in the process industry are proposed in the discussion. In the addressed area, process improvements (efficiency, performance or completely new applications) are most often achieved due to the ability of additive manufacturing to produce complex geometries increasing the functional area while maintaining built-up dimensions and materials specific to the process industry.
This bachelor thesis deals with the possibilities of using additive technologies in the process industry, especially in the field of heat exchangers (heat sinks), membrane distillation and structured packing. In the first part, the thesis provides an overview of the materials and additive technologies used in these process units. The next part is devoted to specific examples of the use of 3D printing in the process applications and their comparison with conventional manufacturing technologies in the world. Furthermore, an overview of supported projects according to the Research, Development and Innovation Information System projects and the market situation in the Czech Republic is outlined. Recommendations for the development of additive manufacturing in the process industry are proposed in the discussion. In the addressed area, process improvements (efficiency, performance or completely new applications) are most often achieved due to the ability of additive manufacturing to produce complex geometries increasing the functional area while maintaining built-up dimensions and materials specific to the process industry.
Description
Keywords
3D tisk, aditivní výroba, tepelný výměník, přenos tepla, přenos hmoty, chladič, minikanál, mikrokanál, membránová destilace, strukturovaná výplň, záchyt uhlíku, 3D printing, additive manufacturing, heat exchanger, heat transfer, mass transfer, heat sink, minichannel, microchannel, membrane destillation, structured packing, carbone capture
Citation
HALTMAR, J. Možnosti využití 3D tisku v procesním průmyslu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
prof. Dr. Ing. Marcus Reppich (předseda)
prof. Ing. Petr Stehlík, CSc., dr. h. c. (místopředseda)
prof. Ing. Zdeněk Jegla, Ph.D. (člen)
doc. Ing. Vítězslav Máša, Ph.D. (člen)
doc. Ing. Vojtěch Turek, Ph.D. (člen)
Ing. Pavel Skryja, Ph.D. (člen)
Ing. Pavel Lošák, Ph.D. (člen)
Date of acceptance
2023-06-14
Defence
Student prezentoval diplomovou práci. Po prezentaci zodpověděl otázky oponenta práce a v navazujícíí diskuzi k diplomové práci otázky položené členy komise.
Dotaz na důvody, které brání častějšímu využití 3D tisku v obalsti procesních zařízení.
Zodpovězeno uspokojivě
Dotaz na formulaci termodynamického zákona a způsoby výměny tepla.
Zodpovězeno uspokojivě
Dotaz na návrh výměníku tepla pro požadovaný výkon Q.
Zodpovězeno uspokojivě
Dotaz na přínos 3D tisku ve výrobě procesních zařízení.
Zodpovězeno částečně
Dotaz na způsob rešerše a volbu klíčových slov.
Zodpovězeno uspokojivě.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení