Návrh rozšíření stroje o možnost oddělování 3D výtisků
Loading...
Date
Authors
Gonda, Josef
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Oddělení kovového 3D výtisku od tiskové desky je klíčovým krokem u většiny metod metalického 3D tisku. Cílem autora je navrhnout přípravek – upínací mechanismus, který rozšiřuje funkcionalitu stávajících pásových pil na kov o možnost komfortního oddělování výtisků. V úvodu práce autor pojednává o metodách kovového 3D tisku. Dále je práce soustředěna na rozbor trhu v dané problematice a stručný popis existujících řešení světových/konkurenčních výrobců pásových pil. Následně je odůvodněn výběr konkrétní pásové pily a jsou stanoveny základní vlastnosti mechanismu. Podstatnou částí je návrh variant řešení a výběr varianty na základě multikriteriální analýzy. Dále autor rozebírá konstrukční řešení vybrané varianty s popisem dílčích detailů, kde klade důraz na dodržení stanovených podmínek a optimalizaci produktu.
Separating of the metal 3D print from the print plate is a key step in most metal 3D printing methods. The author's goal is to design a device - a clamping mechanism that expands the functionality of existing band saws for metal by the possibility of comfortable separation of prints. In the beginning of the work, the author discusses the methods of metal 3D. Furthermore, the author focuses on the analysis of the market in the given issue and a brief description of the existing solutions of world/competing band saw manufacturers. Subsequently, the choice of a specific band saw is justified and the basic properties of the mechanism are determined. An essential part is the design of solution variants and the selection of a variant based on multi-criteria analysis. Furthermore, the author analyzes the design solution of the selected variant with a description of partial details, where he emphasizes compliance with the specified conditions and product optimization.
Separating of the metal 3D print from the print plate is a key step in most metal 3D printing methods. The author's goal is to design a device - a clamping mechanism that expands the functionality of existing band saws for metal by the possibility of comfortable separation of prints. In the beginning of the work, the author discusses the methods of metal 3D. Furthermore, the author focuses on the analysis of the market in the given issue and a brief description of the existing solutions of world/competing band saw manufacturers. Subsequently, the choice of a specific band saw is justified and the basic properties of the mechanism are determined. An essential part is the design of solution variants and the selection of a variant based on multi-criteria analysis. Furthermore, the author analyzes the design solution of the selected variant with a description of partial details, where he emphasizes compliance with the specified conditions and product optimization.
Description
Citation
GONDA, J. Návrh rozšíření stroje o možnost oddělování 3D výtisků [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
doc. Ing. Milan Mihola, Ph.D. (předseda)
doc. Ing. Vladislav Singule, CSc. (místopředseda)
Ing. Pavel Houška, Ph.D. (člen)
Ing. Jiří Tůma, Ph.D. (člen)
Ing. Daniel Zuth, Ph.D. (člen)
Ing. František Bradáč, Ph.D. (člen)
Date of acceptance
2024-06-10
Defence
Prezentace:
1) motivace
2) cíle práce
3) rozdělení metod a proces 3D tisku
4) přehled metod MAN
5) průzkum trhu
6) základní vlastnosti produktu
7) výběr vhodné pásové pily na kov
8) návrh variant řešení
9) konstrukční řešení vybrané varianty
10) upnutí desky, manipulace, bezpečnost
11) 3D model
12) aplikace na pásové pile
13) zhodnocení trhu a závěr
Dotazy oponenta s úspěchem.
Dotazy členů komise:
Jak kryjete funkční mechanismi proti nečistotám způsobených činností stroje.
Jaké máte umístění šroubů lineárního vedení zpohledu zanesení hlav šroubů nečistotami.
Jakým jiným způsobem je možné zabezpečit zanesení šroubů nečistotami.
Student reagoval aktivně se střídavou spokojeností komise.
Student odpovídal na dotazy komise se střídavým úspěchem.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení