Advanced Methods for the Solution of Journal Bearing Dynamics
Loading...
Date
Authors
Maršálek, Ondřej
ORCID
Advisor
Referee
Mark
P
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Náplní této disertační práce je popis komplexní a obecně použitelné strategie výpočetního modelování chování kluzných ložisek, pracujících v režimu smíšeného mazání a uvažujících reálné struktury drsných povrchů obou členů kluzných ložisek – ložiskových pánví a ložiskových čepů. V práci jsou uvedeny a detailně popsány způsoby získání charakteristických popisných dat těchto drsných povrchů a její nedílnou součástí je i popis numerických algoritmů, sloužících k následnému zpracování těchto dat. Dále jsou zde rozebrány implementované výpočetní přístupy k modelování kontaktního tlaku. Ovlivnění hydrodynamické mazací vrstvy kluzných ložisek je dáno velikostí a průběhem faktorů toku, jejichž numerické stanovování je zde detailně popsáno. Alternativní stanovení faktorů toku pomocí analytických funkcí je zde pro úplnost rovněž obsaženo. V závěru práce je uveden popis numerického řešiče modelování chování kluzných ložisek spolu s uvedenými výsledky provedených simulací a jejich diskuzí. Ověření jednotlivých výpočetních modelů, popřípadě porovnání výsledků s výsledky získanými alternativním způsobem, je uvedeno v příslušných kapitolách.
The scope of this dissertation is the description of a complex and generally applicable strategy for computational modelling of slide bearing in mixed lubrication regime. Also taking into consideration real pattern of rough surfaces of both slide bearing parts – bearing shells and bearing pins. Detailed ways to get characteristic data describing rough surfaces and the description of numerical algorithm used for subsequent surface data processing are listed in this doctoral thesis. Furthermore, all the implemented computational models for contact pressure modelling are discussed. The impact on hydrodynamic lubrication layer of slide bearings is given by the size and trend of flow factors, whose numerical determination is also described in detail in this thesis. Alternative assessment of flow factors using analytical equations is also listed for the completeness. In the closing section of this thesis a description of the numerical solver of slide bearing behaviour is included, together with stated and discussed results of realised simulations. The verification of individual computational models and the comparison of their results are presented in relevant chapters.
The scope of this dissertation is the description of a complex and generally applicable strategy for computational modelling of slide bearing in mixed lubrication regime. Also taking into consideration real pattern of rough surfaces of both slide bearing parts – bearing shells and bearing pins. Detailed ways to get characteristic data describing rough surfaces and the description of numerical algorithm used for subsequent surface data processing are listed in this doctoral thesis. Furthermore, all the implemented computational models for contact pressure modelling are discussed. The impact on hydrodynamic lubrication layer of slide bearings is given by the size and trend of flow factors, whose numerical determination is also described in detail in this thesis. Alternative assessment of flow factors using analytical equations is also listed for the completeness. In the closing section of this thesis a description of the numerical solver of slide bearing behaviour is included, together with stated and discussed results of realised simulations. The verification of individual computational models and the comparison of their results are presented in relevant chapters.
Description
Citation
MARŠÁLEK, O. Advanced Methods for the Solution of Journal Bearing Dynamics [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2015.
Document type
Document version
Date of access to the full text
Language of document
en
Study field
Konstrukční a procesní inženýrství
Comittee
prof. Ing. Jiří Stodola, DrSc. (předseda)
prof. Ing. Petr Louda, CSc. (člen)
prof. plk. Ing. Jan Furch, Ph.D. (člen)
doc. Ing. Oldřich Vítek, Ph.D. (člen)
doc. Ing. Zdeněk Kaplan, CSc. (člen)
Date of acceptance
2015-07-16
Defence
Práce přispěla k přenosu teoretických poznatků do průmyslové praxe. Teoretické výsledky zahrnují popis a numerické řešení mazání za smíšených podmínek a představují nové poznatky na mezinárodní úrovni.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení