Výroba repliky krytu přepínače metodou přesného lití
Loading...
Date
Authors
Klátil, Ondřej
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Práce je zaměřena na výrobu repliky krytu přepínače motocyklu ČZ 250/471 z roku 1974. V teoretické části práce je rešerše pojednávající o výrobě trvalých a netrvalých modelů, výrobě forem, různých způsobech odlévání, aditivních technologiích řadících se do metod rapid prototyping a popis způsobů skenování. V experimentální části jsou informace z teoretické části ověřeny na experimentu výroby repliky krytu přepínače. Originální díl byl nejprve naskenován, sken upraven a převeden na objemové těleso, které následně i s vtokovou soustavou bylo vytisknuto na FDM tiskárně metodou spalitelného modelu pro přesné lití do skořepinových forem. Takto zhotovené odlitky se poté vyhodnotily vůči původním dílům. Na závěr experimentu byly zjištěny vady v povrchu. Příčiny těchto vad nelze s určitostí vysvětlit. Následně byly nastíněny různé možnosti způsobu výroby pro určité intervaly podle počtu výrobků.
The work is focused on the production of a replica switch cover for the ČZ 250/471 motorcycle from 1974. The theoretical part of thesis includes a review of the production of permanent and expendable patterns, mold making, various casting methods, additive technologies categorized under rapid prototyping methods, and a description of scanning methods. In the experimental part, the informations from the theoretical part are verified through the experiment of producing the switch cover replica. The original part was first scanned, then the scan was edited and converted into a solid model, which was then printed on an FDM printer as a expendable pattern for the investment casting method using shell molds. These castings were then evaluated against the originals. At the end of the experiment, surface defects were found, the causes of which could not be definitively explained. Subsequently, various production methods were outlined for specific ranges according to the number of products.
The work is focused on the production of a replica switch cover for the ČZ 250/471 motorcycle from 1974. The theoretical part of thesis includes a review of the production of permanent and expendable patterns, mold making, various casting methods, additive technologies categorized under rapid prototyping methods, and a description of scanning methods. In the experimental part, the informations from the theoretical part are verified through the experiment of producing the switch cover replica. The original part was first scanned, then the scan was edited and converted into a solid model, which was then printed on an FDM printer as a expendable pattern for the investment casting method using shell molds. These castings were then evaluated against the originals. At the end of the experiment, surface defects were found, the causes of which could not be definitively explained. Subsequently, various production methods were outlined for specific ranges according to the number of products.
Description
Citation
KLÁTIL, O. Výroba repliky krytu přepínače metodou přesného lití [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
doc. Ing. Libor Čamek, Ph.D. (předseda)
doc. Ing. Antonín Záděra, Ph.D. (místopředseda)
Ing. Vladimír Krutiš, Ph.D. (člen)
Ing. Václav Kaňa, Ph.D. (člen)
Ing. Vítězslav Pernica, Ph.D. (člen)
Ing. Zbyněk Kuzma (člen)
Date of acceptance
2024-06-11
Defence
Student Ondřej Klátil svou prezentací seznámil zkušební komisi s obsahem práce. Práce byla přednesena ve stanoveném čase.
Po prezentaci a přečtení posudků práce byl student vyzván k zodpovězení otázek oponenta, které podrobně zodpověděl. K práci byly vzneseny připomínky a následující otázky:
Proč jste si zvolil zrovna výrobu krytu přepínače?
zodpovězeno
V rozboru ekonomičnosti výroby chybí základní nástřel cen výroby u jednotlivých technologií.
Proč a jakým způsobem jste volil způsob odplynění?
zodpovězeno
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení