Kvalita spánku v závislosti na prostředí v místnosti
Loading...
Date
Authors
Veličková, Kateřina
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Cílem této diplomové práce bylo stanovit tepelný odpor vybraných sestav pro spánek (oděv, matrace, přikrývka, polštář) pomocí měření s tepelným manekýnem a následně stanovit vhodné teploty okolí, při kterých bude zachována vyrovnaná tepelná bilance mezi spící osobou a jejím okolím. Pro účely měření byly vybrány čtyři různé sestavy, které se lišily použitou přikrývkou (letní přikrývka, deka, potah a žádná přikrývka), rovněž byl vyšetřován vliv polohy tepelného manekýna na měřenou hodnotu. Bylo prokázáno, že vliv polohy na celkový tepelný odpor je zanedbatelný, přičemž měřené hodnoty byly mezi 1,12 clo (sestava bez přikrývky při poloze na boku) a 2,05 clo (sestava s letní přikrývkou při poloze na zádech). Následně byly pomocí modelu PMV stanoveny vhodné teploty okolí, které byly v rozmezí 24,4 °C a 28,6 °C. Dvouuzlový model se pro řešenou problematiku ukázal jako příliš málo citlivý, mapy tepelných toků vycházejících z modelu ekvivalentních teplot pak nebyly kalibrovány pro spánek, ale pro mírnou aktivitu v sedě, i tak přinášely zajímavé informace o vnímání tepelného komfortu na různých částech těla.
The aim of this diploma thesis was to determine the thermal resistance of selected sleep assemblies (clothing, mattress, blanket, pillow) using measurements with a thermal manikin and subsequently to determine the appropriate ambient temperatures at which a balanced thermal equilibrium between the sleeping person and their environment would be maintained. Four different assemblies were selected for measurement purposes, differing in the type of blanket used (summer blanket, quilt, cover, and no blanket). The influence of the thermal manikin's position on the measured value was also investigated. It was proven that the influence of position on the overall thermal resistance is negligible, with measured values ranging from 1.12 clo (assembly without a blanket in the side position) to 2.05 clo (assembly with a summer blanket in the back position). Subsequently, appropriate ambient temperatures were determined using the PMV model, which ranged from 24.4 °C to 28.6 °C. The two-node model proved to be insufficiently sensitive for the addressed issue, and the heat flux maps derived from the equivalent temperature model were not calibrated for sleep but for mild activity while seated. Nevertheless, they provided interesting information about the perception of thermal comfort in different parts of the body.
The aim of this diploma thesis was to determine the thermal resistance of selected sleep assemblies (clothing, mattress, blanket, pillow) using measurements with a thermal manikin and subsequently to determine the appropriate ambient temperatures at which a balanced thermal equilibrium between the sleeping person and their environment would be maintained. Four different assemblies were selected for measurement purposes, differing in the type of blanket used (summer blanket, quilt, cover, and no blanket). The influence of the thermal manikin's position on the measured value was also investigated. It was proven that the influence of position on the overall thermal resistance is negligible, with measured values ranging from 1.12 clo (assembly without a blanket in the side position) to 2.05 clo (assembly with a summer blanket in the back position). Subsequently, appropriate ambient temperatures were determined using the PMV model, which ranged from 24.4 °C to 28.6 °C. The two-node model proved to be insufficiently sensitive for the addressed issue, and the heat flux maps derived from the equivalent temperature model were not calibrated for sleep but for mild activity while seated. Nevertheless, they provided interesting information about the perception of thermal comfort in different parts of the body.
Description
Citation
VELIČKOVÁ, K. Kvalita spánku v závislosti na prostředí v místnosti [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Technika prostředí
Comittee
doc. Ing. Jaroslav Katolický, Ph.D. (předseda)
doc. Ing. Bc. Jan Fišer, Ph.D. (člen)
Ing. Stanislav Patočka, Ph.D. (člen)
prof. Ing. Jan Jedelský, Ph.D. (místopředseda)
doc. Ing. František Lízal, Ph.D. (člen)
doc. Ing. Pavel Charvát, Ph.D. (člen)
Date of acceptance
2024-06-12
Defence
Studentka zodpověděla dotazy oponenta.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení