Nová zařízení a materiály pro bioelektroniku
Loading...
Date
Authors
Ehlich, Jiří
ORCID
Advisor
Referee
Mark
P
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta chemická
Abstract
Tato dizertace je syntézou hlavních projektů, kterým jsem se věnoval v průběhu mého doktorského studia. Projekty se rozvíjejí kolem širokého spektra témat, z toho důvodu byl zvolen široký a obecný název. Projekty popsané v této práci se zabývají vývojem elektronických zařízení s využitím v řadě bioelektronických aplikací. První část práce se věnuje vývoji, testování a aplikací platforem pro studium mikroorganismů schopných přímé výměny elektronů s elektronickými zařízeními. Druhá část práce se věnuje elektrické stimulaci kmenových buněk pro jejich řízenou diferenciaci. Dále se zabývá fundamentálním studiem potenciálně škodlivých faradaických reakcí, ke kterým dochází v průběhu stimulačních protokolů používaných v klinické praxi. Všechny popsané projekty sdílí společné teoretické a praktické základy vycházející z chemického inženýrství, elektrochemie a materiálových věd. Sjednocující faktor hrající zásadní roli a objevující se napříč všemi projekty je skupina reakcí souvisejících s redukcí kyslíku. Redukce kyslíku je nezbytná reakce odehrávající se v katodovém poločlánku zařízení pro stadium elektroaktivních mikroorganismů. Redukce kyslíku a následná produkce reaktivních forem kyslíku může mít diskutabilně větší vliv na diferenciaci kmenových buněk pomocí elektrické stimulace než samotná elektrická stimulace. V neposlední řadě reakce související s redukcí kyslíku byly hlavními reakcemi, které jsme pozorovali při aplikaci standardních stimulačních protokolů. Disertace prezentuje stručný teoretický úvod nezbytný pro pochopení prezentovaných projektů. Definuje cíle a prezentuje výsledky formou komentovaného seznamu vědeckých publikací. Rovněž nastiňuje budoucí směřování práce. Hlavní dosažené výsledky mohou být shrnuty následujícím způsobem: Prvním cílem bylo vyvinout platformu založenou na poli mikrobiálních palivových článků pro elektrochemickou charakterizaci elektroaktivních mikroorganismů. Po sérii testovacích prototypů byla vyvinuta platforma splňující všechny předem určené parametry. Platforma se osvědčila jako dostatečně přesná a spolehlivá pro zamýšlené biologické experimenty. Dalším cílem bylo vyrobit platformu pro řízenou diferenciaci kmenových buněk pomocí elektrické stimulace. Bohužel připravená platforma se ukázala jako nespolehlivá a nevhodná pro daný účel. To vedlo k neúspěšné snaze o diferenci kmenových buněk požadovaným směrem. Nakonec jsme se zabývali reakcemi souvisejícími s redukcí kyslíku na elektrodách připravených z nejčastěji používaných materiálů pro neurální stimulaci. Kyslík může být redukovaný na vodu a na peroxid vodíku v závislosti na katalytické aktivitě daného materiálu a charakteru stimulačního protokolu. Změřili jsme množství redukovaného kyslíku a produkovaného peroxidu v blízkosti stimulačních elektrod při aplikaci standardních stimulačních protokolů. Následně jsme porovnali katalytickou aktivitu všech materiálů vzhledem k množství redukovaného kyslíku a produkovaného peroxidu vodíku. Hlavním zjištěním bylo, že všechny elektrodové materiály a všechny testované stimulační protokoly vedou k redukci kyslíku, v některých případech až k lokální hypoxii a všechny materiály generují peroxid vodíku, některé až v řádech jednotek mM. Tyto zjištění považujeme za velmi významné, jelikož ovlivnění koncentrace kyslíku a generace peroxidu vodíku mohou mít výrazný vliv na tkáň v okolí elektrod.
This dissertation represents a synthesis of projects I have been working on in the course of my Ph.D. studies. The projects evolve around a wide range of topics, which is the reason for the broad and general title. Projects described it the thesis involve the development of electronic tools which can be applied to several areas of bioelectronics: The first part of the thesis concerns platforms for the study of unique microorganisms capable of direct electron exchange with electronic devices. This involved design, fabrication, and application of such platforms. The second part of the thesis deals with electrical stimulation; its application to stem cells towards their directed differentiation, and fundamental studies of possibly harmful irreversible faradaic reactions happening in the course of broadly used electrical stimulation protocols applied in clinical practice. All the projects share core, common, theoretical, and practical foundation originating in chemical engineering, electrochemistry, and materials science. A unifying feature playing a major factor and appearing throughout all the projects would be a family of oxygen reduction reactions. Oxygen reduction is a necessary half-cell reaction taking place in the developed device studying electroactive microorganisms. Oxygen reduction and subsequent generation of reactive oxygen species might arguably play a significant role in the direct electrical stimulation of stem cells towards their differentiation. Lastly, oxygen reduction reactions were the main irreversible faradaic reactions we have been observing during standard electrical stimulation protocols. The thesis presents summarized theoretical background necessary to understand presented projects. Goals are defined. Results are introduced as a commented list of published scientific publications. Achieved outcomes are summarized and discussed. Also, a perspective into the future is given. Main results can be summarized as follows. First goal was to develop a platform for electrochemical characterization of electroactive microorganisms. The platform was based on 24 or 96-well Microbial Fuel Cell array. After two design iterations a prototype fulfilling all the intended requirements was developed, tested, and proven to be reliably working. Next, a multi-well platform of interdigitated electrodes was fabricated and used for electrical stimulation of stem cells. Unfortunately, the platform turned out to be unreliable and not working properly which resulted in the failed attempt to differentiate stem cells into a specific type of cells. Lastly, we have examined oxygen reduction reactions (ORRs) on electrodes made of typical materials used for neural stimulation electrodes. Oxygen can be reduced either to water or hydrogen peroxide. Both reactions can significantly reduce the quantity of dissolved oxygen near the electrode, creating hypoxic conditions harmful to neurons. Peroxide, meanwhile, can induce toxic reactions or act as a signaling molecule. We have examined the amount of reduced oxygen and produced peroxide by various stimulation protocols using amperometric sensors and compared electro-catalytic activities of studied materials. Main finding is that typical protocols lead to irreversible ORRs. Some electrode materials induce highly hypoxic conditions, others additionally produce hydrogen peroxide into the mM range.
This dissertation represents a synthesis of projects I have been working on in the course of my Ph.D. studies. The projects evolve around a wide range of topics, which is the reason for the broad and general title. Projects described it the thesis involve the development of electronic tools which can be applied to several areas of bioelectronics: The first part of the thesis concerns platforms for the study of unique microorganisms capable of direct electron exchange with electronic devices. This involved design, fabrication, and application of such platforms. The second part of the thesis deals with electrical stimulation; its application to stem cells towards their directed differentiation, and fundamental studies of possibly harmful irreversible faradaic reactions happening in the course of broadly used electrical stimulation protocols applied in clinical practice. All the projects share core, common, theoretical, and practical foundation originating in chemical engineering, electrochemistry, and materials science. A unifying feature playing a major factor and appearing throughout all the projects would be a family of oxygen reduction reactions. Oxygen reduction is a necessary half-cell reaction taking place in the developed device studying electroactive microorganisms. Oxygen reduction and subsequent generation of reactive oxygen species might arguably play a significant role in the direct electrical stimulation of stem cells towards their differentiation. Lastly, oxygen reduction reactions were the main irreversible faradaic reactions we have been observing during standard electrical stimulation protocols. The thesis presents summarized theoretical background necessary to understand presented projects. Goals are defined. Results are introduced as a commented list of published scientific publications. Achieved outcomes are summarized and discussed. Also, a perspective into the future is given. Main results can be summarized as follows. First goal was to develop a platform for electrochemical characterization of electroactive microorganisms. The platform was based on 24 or 96-well Microbial Fuel Cell array. After two design iterations a prototype fulfilling all the intended requirements was developed, tested, and proven to be reliably working. Next, a multi-well platform of interdigitated electrodes was fabricated and used for electrical stimulation of stem cells. Unfortunately, the platform turned out to be unreliable and not working properly which resulted in the failed attempt to differentiate stem cells into a specific type of cells. Lastly, we have examined oxygen reduction reactions (ORRs) on electrodes made of typical materials used for neural stimulation electrodes. Oxygen can be reduced either to water or hydrogen peroxide. Both reactions can significantly reduce the quantity of dissolved oxygen near the electrode, creating hypoxic conditions harmful to neurons. Peroxide, meanwhile, can induce toxic reactions or act as a signaling molecule. We have examined the amount of reduced oxygen and produced peroxide by various stimulation protocols using amperometric sensors and compared electro-catalytic activities of studied materials. Main finding is that typical protocols lead to irreversible ORRs. Some electrode materials induce highly hypoxic conditions, others additionally produce hydrogen peroxide into the mM range.
Description
Citation
EHLICH, J. Nová zařízení a materiály pro bioelektroniku [online]. Brno: Vysoké učení technické v Brně. Fakulta chemická. 2022.
Document type
Document version
Date of access to the full text
Language of document
en
Study field
Chemie, technologie a vlastnosti materiálů
Comittee
prof. Mgr. Martin Vala, Ph.D. (předseda)
Achilleas Savva, Ph.D. (člen)
Ing. Michal Cifra, Ph.D. (člen)
prof. Ing. Jozef Krajčovič, Ph.D. (člen)
prof. Ing. Jaroslav Boušek, CSc. (člen)
prof. Ing. Martin Weiter, Ph.D. (člen)
Date of acceptance
2022-11-11
Defence
Head of a commitee opened a defence of docotoral thesis by introducing of Ph.D student. Ing. Jiří Ehlich already has rich working experience: e.g. CEITEC January 2021 - present, researcher. He also took part in Intership at Okinawa Institute of Science and Technology, Japan from November 2018 - till January 2019 and from September 2019 till November 2019. In his powerpoint presentation Ing. Ehlich introduced the most important results of his doctoral thesis. Ing. Ehlich successfully answered all questions asked by both reviewers and other members of the commitee. Questions asked by commitee members are written in separate papers which are archived.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení