Analysis of Intensively Blasted Electric Arc Burning in the Arc Heater's Anode Channel
Loading...
Date
2016-10-31
Authors
Šenk, Josef
Jakubová, Ivana
Lázničková, Ilona
0000-0003-1065-9776Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Czech Technical University in Prague
Altmetrics
Abstract
The paper deals with the description of the intensively blasted electric arc burning in Ar in the anode channel of the arc heater operated under various conditions. Directly measured experimental data (current, voltage, gas flow rate, power loss) characterize the operation of the device as a whole but important parameters describing the electric arc inside (its geometry, temperature and voltage distribution) must be revealed using a mathematical model of the arc. An updated version of the model is introduced and used for analysis of two exemplary sets of measured data. The results are given in figures and commented.
The paper deals with the description of the intensively blasted electric arc burning in Ar in the anode channel of the arc heater operated under various conditions. Directly measured experimental data (current, voltage, gas flow rate, power loss) characterize the operation of the device as a whole but important parameters describing the electric arc inside (its geometry, temperature and voltage distribution) must be revealed using a mathematical model of the arc. An updated version of the model is introduced and used for analysis of two exemplary sets of measured data. The results are given in figures and commented.
The paper deals with the description of the intensively blasted electric arc burning in Ar in the anode channel of the arc heater operated under various conditions. Directly measured experimental data (current, voltage, gas flow rate, power loss) characterize the operation of the device as a whole but important parameters describing the electric arc inside (its geometry, temperature and voltage distribution) must be revealed using a mathematical model of the arc. An updated version of the model is introduced and used for analysis of two exemplary sets of measured data. The results are given in figures and commented.
Description
Citation
Acta Polytechnica. 2016, vol. 56, issue 5, p. 395-401.
https://ojs.cvut.cz/ojs/index.php/ap/article/view/3555
https://ojs.cvut.cz/ojs/index.php/ap/article/view/3555
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en