Rentgenová počítačová tomografie embrya myši
but.committee | doc. Ing. Radim Kolář, Ph.D. (předseda) prof. Pharm.Dr. Petr Babula, Ph.D. (místopředseda) doc. RNDr. Jiří Tomáš, Dr. (člen) Ing. Milan Blaha, Ph.D. (člen) Ing. Marina Filipenská, Ph.D. (člen) | cs |
but.defence | Studentka prezentovala výsledky své práce a komise byla seznámena s posudky a odpověděla na otázky členů komise a oponenta. Studentka obhájila bakalářskou práci. | cs |
but.jazyk | čeština (Czech) | |
but.program | Biomedicínské inženýrství a bioinformatika | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Kolář, Radim | cs |
dc.contributor.author | Šejnohová, Marie | cs |
dc.contributor.referee | Walek, Petr | cs |
dc.date.created | 2015 | cs |
dc.description.abstract | Jedním z cílů diplomové práce je porovnání možností dostupných mikro-CT. Teoretická část se zabývá možnostmi barvení měkkých tkání a embryí z důvodu zvýšení kontrastu mikro-CT snímků u těchto tkání. Dále se zde popisují zdroje záření a detektory dostupných mikro-CT systémů. V praxi bylo realizováno barvení embrya ve spolupráci s Ústavem embryologie a histologie v Brně. Následně proběhlo skenování na stanici v Brně na FSI, v Praze na ČVUT a synchrotronu Elettra v Itálii. V práci jsou popsána měření embrya myši pomocí výše uvedených zařízení a výsledky porovnány. Nejlepších výsledků bylo dosaženo na mikro-CT v Brně, kde se využívá rentgenová trubice a flat panel detektor. Tyto snímky se použily pro segmentaci chrupavčité tkáně čichového ústrojí pomocí metody 3D region growing. Z výsledných dat byly vytvořeny 3D modely za účelem porovnání s manuálně segmentovaným modelem. Poloautomatickou segmentací se dosahuje méně přesných výsledků, ale z hlediska časové náročnosti je tato metoda vhodnější. | cs |
dc.description.abstract | The aim of this semestral thesis is to compare the possibilities of available micro-CT systems. Theoretic part of this thesis there deals with possibilities of staining soft tissues and embryos because of enhancement the contrast of micro-CT images. Here follows a description of sources X-ray and detectors of available micro-CT systems. In practice there was realized the staining of embryo in cooperation with Department of histology and embryology in Brno. Then followed a measuring on FSI in Brno, ČVUT in Prague and synchrotron Elettra in Italy. In semestral thesis are described of the thesis there are compared the micro-CT systems and results of measuring embryos by means of presented systems and results are compared.The best results were obtained on micro-CT in Brno, where X-ray tube and flat panel detector were used. This images were used for a segmentation of cartilage olfactory system by means of 3D region growing. From results they were created 3D models for comparison with a manually segmented model. A less accurate results were obtain with the semi-automatic segmentation but this method isn’t too time-consuming. | en |
dc.description.mark | B | cs |
dc.identifier.citation | ŠEJNOHOVÁ, M. Rentgenová počítačová tomografie embrya myši [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2015. | cs |
dc.identifier.other | 84453 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/39530 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | mikro-CT | cs |
dc.subject | barvení | cs |
dc.subject | embryo | cs |
dc.subject | 3D narůstání oblastí | cs |
dc.subject | adaptivní prahování | cs |
dc.subject | analýza obrazů | cs |
dc.subject | micro-CT | en |
dc.subject | staining | en |
dc.subject | embryo | en |
dc.subject | 3D region growing | en |
dc.subject | adaptive thresholding | en |
dc.subject | image analysis | en |
dc.title | Rentgenová počítačová tomografie embrya myši | cs |
dc.title.alternative | X-ray computed tomography of mouse embryo | en |
dc.type | Text | cs |
dc.type.driver | masterThesis | en |
dc.type.evskp | diplomová práce | cs |
dcterms.dateAccepted | 2015-06-09 | cs |
dcterms.modified | 2024-05-17-12:50:26 | cs |
eprints.affiliatedInstitution.faculty | Fakulta elektrotechniky a komunikačních technologií | cs |
sync.item.dbid | 84453 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.26 13:19:09 | en |
sync.item.modts | 2025.01.15 13:07:53 | en |
thesis.discipline | Biomedicínské inženýrství a bioinformatika | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. Ústav biomedicínského inženýrství | cs |
thesis.level | Inženýrský | cs |
thesis.name | Ing. | cs |
Files
Original bundle
1 - 3 of 3
Loading...
- Name:
- final-thesis.pdf
- Size:
- 4.36 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- appendix-1.rar
- Size:
- 2.3 MB
- Format:
- Unknown data format
- Description:
- appendix-1.rar
Loading...
- Name:
- review_84453.html
- Size:
- 6.9 KB
- Format:
- Hypertext Markup Language
- Description:
- file review_84453.html