Návrh jednoúčelového stroje pro měření průhybu
Loading...
Date
Authors
Mejzlík, Jiří
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Cílem práce je navrhnout jednoúčelový stroj určený k měření průhybu. V textu jsou popsána tři možná řešení navrhovaného stroje, u každého z nich je vypočten výrobní takt stroje a stanoveny přibližné cenové náklady. Výsledné řešení je vybráno s ohledem na kompromis mezi oběma těmito klíčovými ukazateli. Další část textu se zabývá výběrem vhodných pohonů manipulátoru a ostatních komponent celého elektrického zařízení. Následně je navrženo možné řešení automatizovaného řízení stroje včetně elektrického zapojení.
The aim of the thesis is to design a special purpose tool for sag measurement. Three possible solutions are proposed, for each the production cycle time is calculated and its approximate costs are estimated. The best solution in terms of a trade-off between both key quantities is suggested. Next part of the work deals with the selection of suitable drives for the manipulator as well as of the other components for the whole electrical device. Finally, a possible automated control of the complete machinery, including the electrical wiring diagram, is presented.
The aim of the thesis is to design a special purpose tool for sag measurement. Three possible solutions are proposed, for each the production cycle time is calculated and its approximate costs are estimated. The best solution in terms of a trade-off between both key quantities is suggested. Next part of the work deals with the selection of suitable drives for the manipulator as well as of the other components for the whole electrical device. Finally, a possible automated control of the complete machinery, including the electrical wiring diagram, is presented.
Description
Keywords
Manipulátor, řízení, programovatelný automat, HMI, frekvenční měnič, lineární motor, Profinet, distribuovaná jednotka, odměřovací systém, bezkontaktní odměřování polohy., Manipulator, control, programmable logic controller, HMI, frequency convertor, linear motor, Profinet, distributed unit, measuring systém, contactless position measurement.
Citation
MEJZLÍK, J. Návrh jednoúčelového stroje pro měření průhybu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2015.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Aplikovaná informatika a řízení
Comittee
prof. Ing. Jiří Tůma, CSc. (předseda)
doc. Ing. Renata Wagnerová, Ph.D. (místopředseda)
Ing. Jiří Michele (člen)
prof. RNDr. Ing. Tomáš Březina, CSc. (člen)
prof. Ing. Pavel Ošmera, CSc. (člen)
doc. Ing. Branislav Lacko, CSc. (člen)
Date of acceptance
2015-06-16
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení