Polyvinylalkoholové hydrogely s gradientovou strukturou v hustotě sesítění
Loading...
Date
Authors
Ščotková, Romana
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta chemická
Abstract
Předložená diplomová práce představuje jednu z mnoha možností fyzikální přípravy PVA hydrogelů s gradientem v hustotě sesítění. Na základě vypracované rešerše, jejíž hlavní náplní byly způsoby přípravy gradientových hydrogelů a charakterizace jejich vlastností, byla vybrána metoda cyklického mrazení a tání, která byla optimalizována se zaměřením na vybrané parametry (molekulová hmotnost polymeru, počet cyklů, délka a teplota cyklů, způsob mrazení) při přípravě. Dalším krokem bylo provedení pilotních experimentů vedoucích k potvrzení a charakterizaci vzniklé gradientové struktury vybranými instrumentálními technikami jako je reometrie, rastrovací elektronová mikroskopie nebo metoda založena na sledování úbytku disperzního prostředí při sušení vzorků. Kromě potvrzení gradientové struktury byl jedním ze studovaných parametrů také vliv přídavku polysacharidu, a vytvoření tak semi-interpenetrovatelné sítě, na výsledné mechanické vlastnosti. Gradientové hydrogely s různou molekulovou hmotností či přídavky polysacharidu coby modelového difuzního činidla byly ve druhé části experimentální práce porovnávány na základě difuzních experimentů za využití methylenové modři. V závěru práce byly všechny získané výsledky diskutovány a byla navržena doplňující měření pro hlubší pochopení dané problematiky.
The presented thesis introduce one of the many possibilities for the physical preparation of PVA hydrogels with a gradient in the crosslinking density. Based on the research conducted, the main focus of which was the preparation methods of gradient hydrogels and the characterization of their properties, a cyclic freezing and thawing method was selected and optimized with a focus on the selected preparation parameters. The next step was to perform pilot experiments leading to the confirmation and characterization of the resulting gradient structure by selected instrumental techniques such as rheology, scanning electron microscopy or a method based on monitoring the loss of dispersion during drying of the samples. In addition to the confirmation of the gradient structure, one of the parameters studied was the effect of the addition of polysaccharide on the resulting mechanical properties. Gradient hydrogels with different molecular weights or biopolymer additions were compared in the second part of the experimental work based on diffusion experiments using methylene blue. At the end of the work, all the results obtained were discussed and additional measurements were proposed for a deeper understanding of the subject.
The presented thesis introduce one of the many possibilities for the physical preparation of PVA hydrogels with a gradient in the crosslinking density. Based on the research conducted, the main focus of which was the preparation methods of gradient hydrogels and the characterization of their properties, a cyclic freezing and thawing method was selected and optimized with a focus on the selected preparation parameters. The next step was to perform pilot experiments leading to the confirmation and characterization of the resulting gradient structure by selected instrumental techniques such as rheology, scanning electron microscopy or a method based on monitoring the loss of dispersion during drying of the samples. In addition to the confirmation of the gradient structure, one of the parameters studied was the effect of the addition of polysaccharide on the resulting mechanical properties. Gradient hydrogels with different molecular weights or biopolymer additions were compared in the second part of the experimental work based on diffusion experiments using methylene blue. At the end of the work, all the results obtained were discussed and additional measurements were proposed for a deeper understanding of the subject.
Description
Citation
ŠČOTKOVÁ, R. Polyvinylalkoholové hydrogely s gradientovou strukturou v hustotě sesítění [online]. Brno: Vysoké učení technické v Brně. Fakulta chemická. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Procesy a materiály medicínských aplikací
Comittee
doc. PharmDr. Ing. Radka Opatřilová, Ph.D. (člen)
doc. Ing. Zdenka Kozáková, Ph.D. (člen)
prof. Mgr. Martin Vala, Ph.D. (člen)
prof. Ing. Stanislav Obruča, Ph.D. (místopředseda)
prof. Ing. Miloslav Pekař, CSc. (předseda)
Date of acceptance
2024-05-28
Defence
Obhajoba proběhla podle následujícího schématu: prezentace studentky-vyjádření vedoucí/ho-oponentský posudek-reakce na posudek-diskuse s komisí. Studentka přednesla výborný výtah výsledků své diplomové práce, řádně zodpověděla všechny dotazy oponentské i členů komise, pohotově reagovala na připomínky. V diskusi tak studentka prokázala výbornou schopnost orientace v teoretických i praktických základech problematiky diplomové práce. Komise zhodnotila její diplomovou práci celkově jako výbornou.
Pekař: Jakým způsobem se kyveta nořila do tekutého dusíku?
Vala: Jak by se dal gradient v gelu modifikovat? Jak udělat strmý přechod?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení