Metody pro testování analogových obvodů
but.committee | prof. Ing. Aleš Prokeš, Ph.D. (předseda) prof. Ing. Dalibor Biolek, CSc. (člen) doc. Dr. Ing. Pavel Horský (člen) prof. Ing. Jiří Mišurec, CSc. (člen) prof. Ing. Miroslav Husák, CSc. - oponent (člen) prof. Ing. Čestmír Vlček, CSc. - oponent (člen) | cs |
but.jazyk | angličtina (English) | |
but.program | Elektrotechnika a komunikační technologie | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Kolka, Zdeněk | en |
dc.contributor.author | Kincl, Zdeněk | en |
dc.contributor.referee | Vlček, Čestmír | en |
dc.contributor.referee | Husák, Miroslav | en |
dc.date.created | 2013 | cs |
dc.description.abstract | Práce se zabývá metodami pro testování lineárních analogových obvodů v kmitočtové oblasti. Cílem je navrhnout efektivní metody pro automatické generování testovacího plánu. Snížením počtu měření a výpočetní náročnosti lze výrazně snížit náklady za testování. Práce se zabývá multifrekveční parametrickou poruchovou analýzou, která byla plně implementována do programu Matlab. Vhodnou volbou testovacích kmitočtů lze potlačit chyby měření a chyby způsobené výrobními tolerancemi obvodových prvků. Navržené metody pro optimální volbu kmitočtů byly statisticky ověřeny metodou MonteCarlo. Pro zvýšení přesnosti a snížení výpočetní náročnosti poruchové analýzy byly vyvinuty postupy založené na metodě nejmenších čtverců a přibližné symbolické analýze. | en |
dc.description.abstract | The thesis deals with methods for testing of linear analog circuits in the frequency domain. The goal is to develop new efficient methods for automatic test plan generation. To reduce test costs a minimum number of measurements as well as less computational demands are the fundamental aims. The thesis is focused on the multi-frequency parametric fault diagnosis which was fully implemented in the Matlab program. The fundamental problem consists in selection of test frequencies which can reduce the influences of measurement errors and errors caused by tolerances of well-working components. The proposed methods for test frequency selection were statistically verified by the MonteCarlo method. To improve the accuracy and reduce the computational complexity of fault diagnosis, the methods based on least-square techniques and approximate symbolic analysis were presented. | cs |
dc.description.mark | P | cs |
dc.identifier.citation | KINCL, Z. Metody pro testování analogových obvodů [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2013. | cs |
dc.identifier.other | 68302 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/24908 | |
dc.language.iso | en | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Analogové obvody | en |
dc.subject | automatické generování testovacího plánu | en |
dc.subject | analýza testovatelnosti | en |
dc.subject | návrh pro snadnou testovatelnost | en |
dc.subject | modelování poruch | en |
dc.subject | multifrekvenční parametrická poruchová analýza | en |
dc.subject | volba testovacích kmitočtů | en |
dc.subject | přeurčená soustava rovnic | en |
dc.subject | přibližná symbolická analýza | en |
dc.subject | redukce parametrů | en |
dc.subject | ATPG | en |
dc.subject | DfT. | en |
dc.subject | Analog circuits | cs |
dc.subject | automatic test pattern generation | cs |
dc.subject | testability analysis | cs |
dc.subject | design for testability | cs |
dc.subject | fault modelling | cs |
dc.subject | multi-frequency parametric fault diagnosis | cs |
dc.subject | test frequency selection | cs |
dc.subject | overdetermined system | cs |
dc.subject | approximate symbolic analysis | cs |
dc.subject | parameter reduction | cs |
dc.subject | ATPG | cs |
dc.subject | DfT. | cs |
dc.title | Metody pro testování analogových obvodů | en |
dc.title.alternative | Methods for testing of analog circuits | cs |
dc.type | Text | cs |
dc.type.driver | doctoralThesis | en |
dc.type.evskp | dizertační práce | cs |
dcterms.dateAccepted | 2013-12-12 | cs |
dcterms.modified | 2013-12-12-13:45:55 | cs |
eprints.affiliatedInstitution.faculty | Fakulta elektrotechniky a komunikačních technologií | cs |
sync.item.dbid | 68302 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.27 11:55:13 | en |
sync.item.modts | 2025.01.17 11:25:11 | en |
thesis.discipline | Elektronika a sdělovací technika | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. Ústav radioelektroniky | cs |
thesis.level | Doktorský | cs |
thesis.name | Ph.D. | cs |
Files
Original bundle
1 - 5 of 5
Loading...
- Name:
- final-thesis.pdf
- Size:
- 6.12 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- thesis-1.pdf
- Size:
- 941.45 KB
- Format:
- Adobe Portable Document Format
- Description:
- thesis-1.pdf
Loading...
- Name:
- Posudek-Oponent prace-Kincl_Posudek Vlcek.pdf
- Size:
- 914.39 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek-Oponent prace-Kincl_Posudek Vlcek.pdf
Loading...
- Name:
- Posudek-Oponent prace-Kinclpos_PhD_2013_Husak.pdf
- Size:
- 551.54 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek-Oponent prace-Kinclpos_PhD_2013_Husak.pdf
Loading...
- Name:
- review_68302.html
- Size:
- 3.96 KB
- Format:
- Hypertext Markup Language
- Description:
- file review_68302.html