Možnosti uplatnění aditivních technologií při přímé výrobě slévárenských forem
Loading...
Date
Authors
Herzán, Jiří
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Bakalářská práce pojednává o výrobě slévárenských forem za využití aditivních technologií. Nejprve jsou v práci uvedeny aditivní technologie, které jsou rozděleny podle organizace ASTM (American Society for Testing and Materials). Dále je uvedeno dělení aditivních technologií dle skupenství základního materiálu. Následně jsou popsány tři druhy technologií, kterými je možné zhotovit odlitek metodou rychlého protypování. Poslední kapitolou bakalářské práce je příklad reálné výroby prototypového odlitku ventilátoru ze slitiny hliníku AlSi9Cu3(Fe), který byl odlit do vytištěné slévárenské formy aditivní technologií „3D Sand Printing“ (3D tiskem písku). Na základě získaných dat byly zhodnoceny technické, časové a nákladové parametry výroby ventilátoru. Získané poznatky byly porovnány s technologií formování na tzv. volný model, která je alternativou výroby prototypu. Odlitek ventilátoru byl odlit ve firmě Armatmetal s.r.o. v Olomouci.
The bachelor thesis deals with the production of foundry molds with using additive technologies. At first, the additive technologies are distributed according to ASTM (American Society for Testing and Materials) and subsequently according to the state of the base material. Then, three types of technologies, that can be manufactured by Rapid Prototyping are described. The last chapter of the bachelor thesis is a real example of the production of a prototype fan casting from aluminum alloy AlSi9Cu3(Fe), which was casted into a printed mold by “3D Sand Printing” technology. Based on the obtained data were assessed technical, time and cost parameters of manufacturing the fan. The findings were compared with the molding technology of the ordinary printed pattern, which is an alternative to prototype production. The casting of the fan was cast in Armatmetal s.r.o. in Olomouc.
The bachelor thesis deals with the production of foundry molds with using additive technologies. At first, the additive technologies are distributed according to ASTM (American Society for Testing and Materials) and subsequently according to the state of the base material. Then, three types of technologies, that can be manufactured by Rapid Prototyping are described. The last chapter of the bachelor thesis is a real example of the production of a prototype fan casting from aluminum alloy AlSi9Cu3(Fe), which was casted into a printed mold by “3D Sand Printing” technology. Based on the obtained data were assessed technical, time and cost parameters of manufacturing the fan. The findings were compared with the molding technology of the ordinary printed pattern, which is an alternative to prototype production. The casting of the fan was cast in Armatmetal s.r.o. in Olomouc.
Description
Citation
HERZÁN, J. Možnosti uplatnění aditivních technologií při přímé výrobě slévárenských forem [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2017.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
doc. Ing. Jaroslav Šenberger, CSc. (předseda)
doc. Ing. Libor Čamek, Ph.D. (místopředseda)
Ing. Petr Cupák, Ph.D. (člen)
Ing. Václav Kaňa, Ph.D. (člen)
Ing. Ladislav Žák, Ph.D. (člen)
Ing. Zbyněk Kuzma (člen)
Ing. Igor Láník (člen)
Date of acceptance
2017-06-20
Defence
Student seznámil komisi s obsahem a výsledky své bakalářské práce a odpověděl na otázky oponenta.
Komise studentovi k práci položila následující otázky:
Skládání formy bylo prováděno na sucho?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení