Analýza sendvičových struktur metodou konečných prvků
but.committee | doc. Ing. Jaroslav Juračka, Ph.D. (předseda) doc. Ing. Jiří Hlinka, Ph.D. (místopředseda) prof. Ing. Karol Fiľakovský, CSc. (člen) doc. Ing. Ivo Jebáček, Ph.D. (člen) Ing. Miroslav Šplíchal, Ph.D. (člen) doc. Ing. Miloslav Petrásek, CSc. (člen) Ing. Robert Popela, Ph.D. (člen) doc. Ing. Karel Třetina, CSc. (člen) | cs |
but.defence | cs | |
but.jazyk | čeština (Czech) | |
but.program | Strojírenství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Mališ, Michal | cs |
dc.contributor.author | Bucňák, Ondřej | cs |
dc.contributor.referee | Schoř, Pavel | cs |
dc.date.accessioned | 2019-05-17T12:21:31Z | |
dc.date.available | 2019-05-17T12:21:31Z | |
dc.date.created | 2014 | cs |
dc.description.abstract | Tato bakalářská práce se zaměřuje na rozbor materiálového modelu jádra sendvičových struktur. Chování sendvičového jádra je simulováno pomocí metody konečných prvků (MKP) v programech MSC.Patran/Nastran. První část se věnuje popisu vlastností sendvičových struktur a jeho částí. Jsou zde uvedeny příklady uplatnění sendvičových struktur. Další část popisuje základní materiálové modely. V poslední části je provedena MKP analýza materiálového modelu pěnového jádra sendviče a porovnání výsledků se zkouškou čtyřbodového ohybu. | cs |
dc.description.abstract | This bachelor’s thesis focuses on the analysis of material model core sandwich structures. The behavior of the sandwich core is simulated using Finite Element Method (FEM) in programs MSC.Patran/Nastran. The first part deals with describing the properties of sandwich structures and its components. There are presented examples of the application of sandwich structures. The next section describes the elementary material models. In the last part of bachelor’s thesis is performed FEM analysis of material model sandwich foam core and comparison to the results with the four-point bending test. | en |
dc.description.mark | A | cs |
dc.identifier.citation | BUCŇÁK, O. Analýza sendvičových struktur metodou konečných prvků [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2014. | cs |
dc.identifier.other | 71592 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/33511 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | sendvičové struktury | cs |
dc.subject | materiálový model | cs |
dc.subject | pěnové jádro | cs |
dc.subject | MKP | cs |
dc.subject | kompozity | cs |
dc.subject | sandwich structures | en |
dc.subject | material model | en |
dc.subject | foam core | en |
dc.subject | FEM | en |
dc.subject | composites | en |
dc.title | Analýza sendvičových struktur metodou konečných prvků | cs |
dc.title.alternative | Sandwich structure analysis using Finite Element Methods | en |
dc.type | Text | cs |
dc.type.driver | bachelorThesis | en |
dc.type.evskp | bakalářská práce | cs |
dcterms.dateAccepted | 2014-06-18 | cs |
dcterms.modified | 2014-06-18-19:20:57 | cs |
eprints.affiliatedInstitution.faculty | Fakulta strojního inženýrství | cs |
sync.item.dbid | 71592 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2021.11.12 21:07:49 | en |
sync.item.modts | 2021.11.12 20:33:26 | en |
thesis.discipline | Strojní inženýrství | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta strojního inženýrství. Letecký ústav | cs |
thesis.level | Bakalářský | cs |
thesis.name | Bc. | cs |