Svařování otěruvzdorných ocelí laserovým svazkem
Loading...
Date
Authors
Sklenář, Zdeněk
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Projekt vypracovaný v rámci inženýrského studia porovnává svařování otěruvzdorného materiálu HARDOX 400, metodou svařování vláknovým laserem, která bude porovnávána s metodou svařování MAG a za použití různých ochranných plynů (Argon a Helium). V rámci teoretické části sem zpracoval obě technologie svařování a problematiku oceli s vyšší pevností. V experimentální části byly provedeny a vyhodnoceny destruktivní mechanické zkoušky a to zkouška lámavosti, příčná zkouška tahem, zkouška makrostruktury a zkouška mikrostruktury svarů. V závěru diplomové práce vyvozeny konečné výsledky experimentu.
The project, prepared by the engineering study compares the welding abrasive steel HARDOX 400, fiber laser welding method, which will be compared with a MAG welding method and using different protective gases (argon and helium). In the theoretical part, i worked both welding technology's and the issue of high-strength steel. In the experimental part were performed and evaluated by destructive mechanical testing and bending test, the transverse tension test, test macrostructure and microstructure of welds. In conclusion the thesis deduced the final results of the experiment.
The project, prepared by the engineering study compares the welding abrasive steel HARDOX 400, fiber laser welding method, which will be compared with a MAG welding method and using different protective gases (argon and helium). In the theoretical part, i worked both welding technology's and the issue of high-strength steel. In the experimental part were performed and evaluated by destructive mechanical testing and bending test, the transverse tension test, test macrostructure and microstructure of welds. In conclusion the thesis deduced the final results of the experiment.
Description
Citation
SKLENÁŘ, Z. Svařování otěruvzdorných ocelí laserovým svazkem [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2012.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
doc. Ing. Ladislav Daněk, CSc. (předseda)
prof. Ing. Jaroslav Purmenský, DrSc. (místopředseda)
doc. Ing. Heinz Neumann, CSc. (člen)
doc. Ing. Miroslav Suchánek, CSc. (člen)
Ing. Evžen Vyplašil, CSc. (člen)
Ing. Vladimír Kudělka, Ph.D. (člen)
Date of acceptance
2012-06-18
Defence
Diplomant seznámil zkušební komisi s průběhem a výsledky závěrečné diplomové práce. Zodpověděl otázky recenzenta i otázky komise.
Otázky komise:
Jaké destruktivní zkoušky jste použil?
Jakou metodu svařování by jste pro svařování uvedeného materiálu použil?
Co znamená označení HS ocelí?
Jaký je rozdíl mezi He a Ar pro ochranu svaru?
Popište a vysvětlete záznam z tahové zkoušky.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení