Porovnání určování polohy pomocí virtuálních referenčních stanic ze sítí CZEPOS, TopNET a Trimble VRS Now
Loading...
Date
2025-03-24
Authors
Kostelecký, Jakub
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně,Fakulta stavební
Altmetrics
Abstract
Metoda RTK s využitím sítí referenčních stanic je vysoce efektivní způsob určení prostorové polohy v geodetických aplikacích. Využití aplikace VRS (virtuálních referenčních stanic) efektivitu zvyšuje z hlediska rychlosti inicializace a zvýšení přesnosti určení polohy. Článek se zabývá testováním určení polohy pomocí VRS generovaných sítěmi referenčních stanic CZEPOS, TopNET a Trimble VRS Now v ČR. Testování bylo provedeno pomocí 11 aparatur. Hodnocena byla průměrná doba inicializace a střední chyba určení polohy v horizontálním a vertikálním směru při měření za různých příjmových podmínek, v různou denní dobu a s různou délkou průměrování výsledku. Výsledky ukazují, že aparatury se nejrychleji inicializují v síti Trimble VRS Now a nejpomaleji v síti CZEPOS. Z hlediska přesnosti byly získány nejpřesnější výsledky v síti CZEPOS a nejméně přesné výsledky v síti Trimble VRS Now. Byla zjištěna závislost přesnosti na vzdálenosti nejbližší referenční stanice dané sítě referenčních stanic, i když tento vliv by měla aplikace VRS výrazně snížit.
The RTK method using reference station networks is a highly effective method of determining spatial position in geodetic applications. The use of the VRS application (virtual reference stations) increases efficiency in terms of initialization speed and increasing position determination accuracy. The article deals with testing position determination using VRS generated by the CZEPOS, TopNET and Trimble VRS Now reference station networks in the Czech Republic. Testing was carried out using 11 devices. The average initialization time and the mean position determination error in the horizontal and vertical directions were evaluated when measuring under different reception conditions, at different times of day and with different durations of result averaging. The results show that the devices initialize fastest in the Trimble VRS Now network and slowest in the CZEPOS network. In terms of accuracy, the most accurate results were obtained in the CZEPOS network and the least accurate results in the Trimble VRS Now network. The dependence of accuracy on the distance to the nearest reference station of the given reference station network was found, although the VRS application should significantly reduce this effect.
The RTK method using reference station networks is a highly effective method of determining spatial position in geodetic applications. The use of the VRS application (virtual reference stations) increases efficiency in terms of initialization speed and increasing position determination accuracy. The article deals with testing position determination using VRS generated by the CZEPOS, TopNET and Trimble VRS Now reference station networks in the Czech Republic. Testing was carried out using 11 devices. The average initialization time and the mean position determination error in the horizontal and vertical directions were evaluated when measuring under different reception conditions, at different times of day and with different durations of result averaging. The results show that the devices initialize fastest in the Trimble VRS Now network and slowest in the CZEPOS network. In terms of accuracy, the most accurate results were obtained in the CZEPOS network and the least accurate results in the Trimble VRS Now network. The dependence of accuracy on the distance to the nearest reference station of the given reference station network was found, although the VRS application should significantly reduce this effect.
Description
Citation
Družicové metody v teorii a praxi 2025, s. 20-27. ISBN 978-80-86433-86-8.
http://geodesy.fce.vutbr.cz/konference/gnss-seminar/
http://geodesy.fce.vutbr.cz/konference/gnss-seminar/
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
cz
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
© Vysoké učení technické v Brně,Fakulta stavební