Šíření spinových vln ve strukturách s lokálně modifikovanou magnetickou anizotropií
Loading...
Date
Authors
Roučka, Václav
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Zařízení založená na spinových vlnách mají potenciál být využita ve výpočetní technice s nízkou spotřebou energie. Pro úspěšné využití je samozřejmě potřeba spojit více takových zařízení na jednom čipu, součástí čehož musí být zatáčení spinových vln zahnutými vlnovody. Problém zatáčení spinových vln v dipolárně výměnném režimu zatím nebyl uspokojivě vyřešen, vyzkoušené přístupy vedly ke ztrátě intenzity a fázové koherence. V této diplomové práci jsme zkoumali dva systémy, které by mohly být využity k zatáčení spinových vln. Prvním z nich jsou tenké metastabilní vrstvy slitiny železa a niklu. Paramagnetická metastabilní fcc vrstva, která byla epitaxně narostena na substrátu z mědi, může být transformována do stabilní ferromagnetické bcc fáze pomocí fokusovaného iontového svazku. Tato technika nám dává prostorovou kontrolu nad transformačním procesem a strategie skenování svazkem nám dokonce umožňuje určit směr mangetické anisotropie. Magnetické vlastnosti struktur vytvořených touto metodou a lom spinových vln mezi doménami s odlišným směrem magnetické anisotropie byly změřeny pomocí mikroskopie Brillouinova rozptylu světla. Druhým zkoumaným systémem jsou zvlněné vlnovody, jejichž zvlnění indukuje magnetickou anisotropii. Zvlnění magnetické vrstvy je vytvořeno depozicí nemagnetických vlnek na substrátu indukovanou fokusovaným elektronovým svazkem a následnou depozicí magnetického materiálu. Byly vyrobeny různé návrhy zatočených zvlněných vlnovodů a změřili jsme šíření spinových vln jejich zatáčkami pomocí mikroskopie Brillouinova rozptylu světla. Využili jsme také mikromagnetické simulace pro získání hlubšího porozumění zkoumané problematiky a pro hledání vhodných návrhů experimentů.
Devices based on spin waves have the potential to be used in low-power data processing. Naturally, a successful application would require many of those devices to be interconnected on a chip. Such a chip would have to include steering of spin waves through turned waveguides. The issue of steering dipole-exchange spin waves through waveguides has not been sufficiently solved so far, as the tested designs lead to a loss of intensity and phase coherence. In the presented thesis, we have studied two systems, which could be exploited for spin-wave steering. First, we dealt with metastable iron-nickel thin films. The paramagnetic metastable fcc layer epitaxially grown on a Cu substrate can be transformed into a stable ferromagnetic bcc phase by a focused ion beam. This technique gives us spatial control over the transformation process, and the scanning strategy even allows us to determine the direction of magnetic anisotropy. Magnetic properties of structures prepared by this technique, together with spin-wave refraction between domains with different anisotropy directions, were characterized by Brillouin light scattering microscopy. Moreover, we have studied spin-wave propagation in a system with corrugation induced magnetic anisotropy. The corrugated magnetic film is created by focused electron beam-induced deposition of nonmagnetic ridges on a substrate and subsequent deposition of the magnetic material. Turned corrugated waveguides of different designs were prepared and we have measured spin-wave propagation through them by Brillouin light scattering microscopy. Micromagnetic simulations were also employed to provide further insight and to help us identify good experimental designs.
Devices based on spin waves have the potential to be used in low-power data processing. Naturally, a successful application would require many of those devices to be interconnected on a chip. Such a chip would have to include steering of spin waves through turned waveguides. The issue of steering dipole-exchange spin waves through waveguides has not been sufficiently solved so far, as the tested designs lead to a loss of intensity and phase coherence. In the presented thesis, we have studied two systems, which could be exploited for spin-wave steering. First, we dealt with metastable iron-nickel thin films. The paramagnetic metastable fcc layer epitaxially grown on a Cu substrate can be transformed into a stable ferromagnetic bcc phase by a focused ion beam. This technique gives us spatial control over the transformation process, and the scanning strategy even allows us to determine the direction of magnetic anisotropy. Magnetic properties of structures prepared by this technique, together with spin-wave refraction between domains with different anisotropy directions, were characterized by Brillouin light scattering microscopy. Moreover, we have studied spin-wave propagation in a system with corrugation induced magnetic anisotropy. The corrugated magnetic film is created by focused electron beam-induced deposition of nonmagnetic ridges on a substrate and subsequent deposition of the magnetic material. Turned corrugated waveguides of different designs were prepared and we have measured spin-wave propagation through them by Brillouin light scattering microscopy. Micromagnetic simulations were also employed to provide further insight and to help us identify good experimental designs.
Description
Citation
ROUČKA, V. Šíření spinových vln ve strukturách s lokálně modifikovanou magnetickou anizotropií [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2021.
Document type
Document version
Date of access to the full text
Language of document
en
Study field
bez specializace
Comittee
prof. RNDr. Tomáš Šikola, CSc. (předseda)
prof. RNDr. Miroslav Liška, DrSc. (místopředseda)
prof. RNDr. Jiří Komrska, CSc. (člen)
prof. RNDr. Petr Dub, CSc. (člen)
prof. RNDr. Radim Chmelík, Ph.D. (člen)
prof. RNDr. Jiří Spousta, Ph.D. (člen)
doc. Ing. Radek Kalousek, Ph.D. (člen)
doc. Mgr. Adam Dubroka, Ph.D. (člen)
prof. Mgr. Dominik Munzar, Dr. (člen)
RNDr. Antonín Fejfar, CSc. (člen)
prof. RNDr. Bohumila Lencová, CSc. (člen)
doc. Ing. Stanislav Průša, Ph.D. (člen)
Date of acceptance
2021-06-15
Defence
Po otázkách oponenta bylo diskutováno:
Disperzní relace spinové vlny.
Student otázku zodpověděl.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení