Elektronicky rekonfigurovatelné kmitočtové filtry
Loading...
Date
Authors
Gajdoš, Adam
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Cílem diplomové práce bylo navrhnout filtrační SISO struktury s elektronicky rekonfigurovatelnou změnou přenosové funkce za pomoci netradičních aktivních prvků s minimálně jedním řiditelným parametrem. V první části práce je pojednáno o rozdělení kmitočtových filtrů, pracovních režimech, ve kterých mohou pracovat a jejich návrhu pomocí metody Grafy signálových toků. V neposlední řadě je také probrána teorie elektronické rekonfigurace a vlivu parazitních vlastností obvodu. Druhá část práce se zabývá rozborem vlastností použitých aktivních prvků. Probrána je jejich funkce, zapojení pomocí dostupných reálných prvků (UCC a EL2082), tak i jejich transformace do podoby grafů signálových toků. V předposlední části práce je navrženo 5 zapojení rekonfigurovatelných SISO filtračních obvodů s použitím programu SNAP a je provedena jejich simulace v programu OrCAD jak s ideálními, tak i reálnými simulačními modely aktivních prvků. Poslední část se zabývá návrhem jednoho z navržených filtrů v programu EAGLE a jeho experimentálním měřením.
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
Description
Keywords
kmitočtový filtr, rekonfigurovatelný filtr, rekonfigurace, proudový zesilovač, proudový mód, CM, Universální proudový konvejor, UCC, Transkonduktanční zesilovač, OTA, Voltage Differencing Current Conveyor, VDCC, Current conveyor transconductance amplifier, CCTA, grafy signálových toků, M-C grafy, mezní kmitočet, činitel jakosti, requency filter, current amplifier, reconfigurable frequency filters, current mode, CM, universal current conveyor, UCC, transconductance amplifier, OTA, Voltage Differencing Current Conveyor, VDCC, Current conveyor transconductance amplifier, CCTA, MC signal flow graphs, the cutoff frequency, quality factor
Citation
GAJDOŠ, A. Elektronicky rekonfigurovatelné kmitočtové filtry [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2016.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Telekomunikační a informační technika
Comittee
prof. Ing. Aleš Prokeš, Ph.D. (předseda)
prof. Ing. Dan Komosný, Ph.D. (místopředseda)
Ing. Jan Skapa, Ph.D. (člen)
Ing. Lukáš Povoda, Ph.D. (člen)
doc. Ing. Jan Jeřábek, Ph.D. (člen)
doc. Ing. Jiří Mekyska, Ph.D. (člen)
Date of acceptance
2016-06-09
Defence
- Zamyslete se nad tím, které parazitní vlastnosti použitých aktivních prvků ovlivňují naměřené průběhz na vysokých kmitočtech.
- Objasněte, jaké je správné značení výstupů u schématické značkz a korespondující značení u M-C grafu v případě prvku OTA.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení