Technologie výroby plastového tělesa clony
Loading...
Date
Authors
Dluhoš, Jan
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
V diplomové práci je řešena problematika výroby plastového tělesa clony metodou vstřikování plastů. Práce obsahuje návrh vstřikovací formy pro zadaný dílec. Nejprve byl zvolen vhodný materiál výlisku, dále byly provedeny nezbytné výpočty vstřikovací formy. Na základě těchto výpočtů byla zkonstruována čtyřnásobná vstřikovací forma s vyhřívanou vtokovou tryskou a výsuvnými jádry. Pří návrhu vstřikovací formy byly voleny stavebnicové komponenty. Další část diplomové práce obsahuje volbu vstřikovacího stroje pro danou formu. V závěru je technicko-ekonomické zhodnocení obsahující odhad ceny vstřikovací formy a odhad ceny jednoho výlisku.
This thesis deals with the production of a plastic body of the aperture by the method of injection moulding. The work includes a design of the injection mould for the given component. First, an appropriate material for the moulded piece was chosen and then the necessary calculations for the injection mould were made. A quadruplex injection mould with a heated inlet nozzle and pullout cores was designed based on these calculations. Modular components were chosen when designing the injection mould. The next part of the thesis contains the selection of the injection moulding machine for the given mould. The conclusion contains a technical-economical evaluation including the cost estimating for the injection mould and cost estimating for one moulded piece.
This thesis deals with the production of a plastic body of the aperture by the method of injection moulding. The work includes a design of the injection mould for the given component. First, an appropriate material for the moulded piece was chosen and then the necessary calculations for the injection mould were made. A quadruplex injection mould with a heated inlet nozzle and pullout cores was designed based on these calculations. Modular components were chosen when designing the injection mould. The next part of the thesis contains the selection of the injection moulding machine for the given mould. The conclusion contains a technical-economical evaluation including the cost estimating for the injection mould and cost estimating for one moulded piece.
Description
Citation
DLUHOŠ, J. Technologie výroby plastového tělesa clony [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2013.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
prof. Ing. Radko Samek, CSc. (předseda)
prof. Ing. Milan Forejt, CSc. (místopředseda)
doc. Ing. Zdeněk Lidmila, CSc. (člen)
Ing. Jiří Tomášek, CSc. (člen)
Ing. Jan Leimberger, CSc. (člen)
prof. Ing. Stanislav Věchet, CSc. (člen)
Date of acceptance
2013-06-17
Defence
Diplomant seznámil komisi s výsledky diplomové práce.
Diplomant odpověděl na otázky oponenta.
Otázky komise týkající se DP:
1.Jaké druhy skelných vláken mohou být?
2. Mohou se do kompozitů přidávat i jiné přísady než skelná vlákna?
3. Z jakého jiného materiálu by mohla být ještě vlákna?
4. Kolik byla cena hliníkového výrobku?
5. Jakým hlavním důvodem byla náhrada hliníkového výrobku plastovým?
6. Proč jste volil PTFE? Z jakého důvodu bylo zvoleno dané složení? Hrála při volbě roli teplota?
7. Materiál POM 770 je poměrně drahý. Bylo by možné nahradit daný materiál jiným se stejnými vlastnostmi? Lze jiný materiál namíchat dle vastních požadavků?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení