Konstrukce zařízení pro thermoforming
Loading...
Date
Authors
Vozár, Vojtěch
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato bakalářská práce se zabývá konstrukčním návrhem stroje pro tvarování plastových desek za pomoci tepla a vakua. Rešeršní část této práce pojednává o technologii tepelného tváření plastů, jednotlivých částech výrobního procesu a nástrojích použitých při procesu tepelného tváření. Rešeršní část zahrnuje také popis dostupných strojů na trhu. V následujících kapitolách jsou popsány požadavky na stroj, výběr z variant konstrukce dle metody vážených hodnot a podrobný návrh stroje. Na závěr je zpracován odhad ceny stroje a zhodnocení výsledků práce. Součástí bakalářské práce je 3D model vypracovaný v programu SOLIDWORKS 2023 a vybrané výkresy.
This bachelor's thesis deals with the design proposal of a machine for thermoforming using and vacuum. The research part of this thesis discusses the technology of thermoforming plastics, production process, and tools used in thermoforming. Research part also includes a description of the machines available on the market. Following chapters describe the requirements for the machine, selection of design variants based on the weighted values method, and detailed design of the machine. Final part of thesis provides an estimate of the machine's cost and an evaluation of the results of the work. Bachelor thesis includes a 3D model created in SOLIDWORKS 2023 and chosen technical drawings.
This bachelor's thesis deals with the design proposal of a machine for thermoforming using and vacuum. The research part of this thesis discusses the technology of thermoforming plastics, production process, and tools used in thermoforming. Research part also includes a description of the machines available on the market. Following chapters describe the requirements for the machine, selection of design variants based on the weighted values method, and detailed design of the machine. Final part of thesis provides an estimate of the machine's cost and an evaluation of the results of the work. Bachelor thesis includes a 3D model created in SOLIDWORKS 2023 and chosen technical drawings.
Description
Citation
VOZÁR, V. Konstrukce zařízení pro thermoforming [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Stavba strojů a zařízení
Comittee
doc. Ing. Radek Knoflíček, Dr. (předseda)
doc. Ing. Lubomír Vašek, CSc. (místopředseda)
Ing. Jan Pavlík, Ph.D. (člen)
Ing. Zdeněk Tůma, Ph.D. (člen)
Ing. Radim Blecha, Ph.D. (člen)
Ing. Tomáš Marada, Ph.D. (člen)
Date of acceptance
2024-06-12
Defence
Prezentace:
- Cíle
- Co je to "thermoforming"?
- Materiály pro formování.
- Dostupné stroje na trhu
- Konstrukční návrh: Topný, vakuový a přetlakový systém, Konstrukční celek
- Topný systém
- Vakuový systém
- Přetlakový systém
- Celek a ergonomie
- Závěr
Student seznámil členy komise s výsledky své práce a odpověděl na všechny otázky oponenta.
Otázky členů komise:
- Co to znamená škrtící ventil na odfuku a jak to bude fungovat? (stručně zodpovězeno)
- Proč je potřeba používat samostatně kompresor a vakuovou pumpu? (stručně zodpovězeno)
- Co je graf PID regulace? (zodpovězeno s váznými nedostatky)
Student odpověděl na otázky členů komise s drobnými nedostatky.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení