Návrh repliky letounu L-40 "Meta Sokol" - křídlo
but.committee | prof. Ing. Antonín Píštěk, CSc. (předseda) doc. Ing. Vladimír Daněk, CSc. (místopředseda) doc. Ing. Luboš Janko, CSc. (člen) doc. Ing. Jaroslav Juračka, Ph.D. (člen) doc. Ing. Josef Klement, CSc. (člen) Ing. Jindřich Ploch, CSc. (člen) doc. Ing. Ivo Jebáček, Ph.D. (člen) Ing. Miroslav Pešák (člen) Ing. Václav Zajíc (člen) | cs |
but.jazyk | čeština (Czech) | |
but.program | Strojní inženýrství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Píštěk, Antonín | cs |
dc.contributor.author | Pluhař, Tomáš | cs |
dc.contributor.referee | Jebáček, Ivo | cs |
dc.date.created | 2008 | cs |
dc.description.abstract | Tato diplomová práce se zabývá návrhem křídla, křidélka, vztlakové klapky a hlavního podvozku ultralehké repliky letounu L-40 Meta Sokol. Vznikala ve spolupráci s dalšími dvěma členy týmu, Alicí Lipkovu (aerodynamika, výkony) a Miroslavem Růžičkou (trup, ocasní plochy a ostruha). První část práce je věnována zatížení a návrhu konstrukce křídla. Nejprve je stanovena letová obálka, dále je určen průběh posouvající síly, ohybového momentu a krouticího momentu po rozpětí křídla. Je také řešen návrh a následná pevnostní kontrola konstrukce křídla. Stejný postup je uplatněn při návrhu křidélka a vztlakové klapky. Druhá část diplomové práce se zabývá hlavním podvozkem, jeho uchycením, konstrukcí, odpružením a principem zatahování. Poslední pasáž je věnována zatížení podvozku. | cs |
dc.description.abstract | This diploma thesis targets in concept of wing, aileron, flap and main undercarriage of the ultralight replication of the plane L-40 called Meta Sokol. The thesis developed from cooperation with two other members of the team – Alice Lipková (aerodynamics, power) and Miroslav Růžička (fuselage, tail unit and rear gear). The first part of this diploma thesis is concerned with load and concept of structure of the wing. At first the flight envelope is specified, then charakteristics of shearing force, bending moment and torsion moment are determined spanwise. The concept and subsequent strength verification of structure of the wing is also solved. The same process is claimed to concept of the aileron and the flap. The second part of this diploma thesis is dealt with main landing gear, its support, structure, springing and the principle of retraction. The final passage is devoted to load of the undercarriage. | en |
dc.description.mark | B | cs |
dc.identifier.citation | PLUHAŘ, T. Návrh repliky letounu L-40 "Meta Sokol" - křídlo [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2008. | cs |
dc.identifier.other | 12856 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/1213 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Křídlo | cs |
dc.subject | křidélko | cs |
dc.subject | vztlaková klapka | cs |
dc.subject | hlavní podvozek | cs |
dc.subject | zatížení | cs |
dc.subject | konstrukce. | cs |
dc.subject | Wing | en |
dc.subject | aileron | en |
dc.subject | flap | en |
dc.subject | main undercarriage | en |
dc.subject | load | en |
dc.subject | structure. | en |
dc.title | Návrh repliky letounu L-40 "Meta Sokol" - křídlo | cs |
dc.title.alternative | Replica Design of L-40 "Meta Sokol " Aircraft - wing | en |
dc.type | Text | cs |
dc.type.driver | masterThesis | en |
dc.type.evskp | diplomová práce | cs |
dcterms.dateAccepted | 2008-06-09 | cs |
dcterms.modified | 2008-06-10-06:07:45 | cs |
eprints.affiliatedInstitution.faculty | Fakulta strojního inženýrství | cs |
sync.item.dbid | 12856 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.26 22:52:17 | en |
sync.item.modts | 2025.01.15 15:09:46 | en |
thesis.discipline | Letadlová technika | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta strojního inženýrství. Letecký ústav | cs |
thesis.level | Inženýrský | cs |
thesis.name | Ing. | cs |
Files
Original bundle
1 - 3 of 3
Loading...
- Name:
- final-thesis.pdf
- Size:
- 2.57 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- review_12856.html
- Size:
- 7.02 KB
- Format:
- Hypertext Markup Language
- Description:
- file review_12856.html