Bytový dům
Loading...
Date
Authors
Štepanovský, Stanislav
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Předmětem bakalářské práce je vypracování projektové dokumentace pro novostavbu bytového domu v Brně. Navrhovaný bytový dům bude třípodlažní, nepodsklepený s rozlohu 305 m2. Provozně se byt dělí na deset bytových jednotek. V prvním nadzemním podlaží se nacházejí tři byty s dispozicí 1+KK, 2+KK a byt 3+KK. Jeden z bytů s dispozicí 2+KK je řešen jako bezbariérový. První patro je dále vybaveno technickou místností, sklepními kójemi, místností určenou pro úklid a kočárkárnou. Výtahová šachta je vytvořena ze železobetonu tloušťky 200 mm a je oddilatována od objektu pomocí čedičové vlny tloušťky 25 mm. Šachta je opatřena bezprašným nátěrem a je vybavena hydraulickým výtahem, který není určen pro požární evakuaci. V druhém nadzemním podlaží se nacházejí celkem čtyři byty. Dva jsou koncipované jako 2+KK, zatímco další dva byty mají dispozici 3+KK. Ve třetím nadzemním podlaží se nacházejí tři byty. Jeden z nich je řešen jako nadstandartní o užitné ploše 148 m2. Nosný konstrukční systém bude řešen jako zděný z keramických tvárnic, který bude uložen na základových pasech z prostého betonu. Stropní konstrukce jsou řešeny jako monolitické železobetonové desky tloušťky 250 mm. Balkónové desky jsou řešeny jako vetknutá železobetonová konzola ve spádu 3 %. Střecha je navržena jako pochozí plochá konstrukce, která má integrované vegetační souvrství. Objekt je kontaktně zateplen čedičovou vlnou tloušťky 160 mm.
The subject of the bachelor’s thesis is the preparation of project documentation for the new construction of an apartment building in Brno. The proposed apartment building will be three-story, without a basement, and with a floor area of 305 m. Operationally, the building is divided into ten housing units. On the first floor, there are three apartments with layouts of 1+KK, 2+KK, and 3+KK. One of the apartments with a 2+KK layout is designed as barrier-free. The first floor is further equipped with a utility room, cellar cubicles, a room designated for cleaning, and a pram room. The elevator shaft is made of reinforced concrete with a thickness of 200 mm and is separated from the building by basalt wool with a thickness of 25 mm. The shaft is coated with a dust-free paint and is equipped with a hydraulic elevator, which is not intended for fire evacuation. On the second floor, there are a total of four apartments. Two are designed as 2+KK, while the other two apartments have a 3+KK layout. On the third floor, there are three apartments. One of them is designed as above-standard with a usable area of 148 m. The load-bearing structural system will be solved as masonry made of ceramic blocks, which will be placed on foundation strips of plain concrete. The ceiling structures are designed as monolithic reinforced concrete slabs with a thickness of 250 mm. The balcony slabs are designed as an embedded reinforced concrete cantilever with a slope of 3%. The roof is designed as a walkable flat structure, which has an integrated vegetative layer. The building is thermally insulated with contact basalt wool with a thickness of 160 mm.
The subject of the bachelor’s thesis is the preparation of project documentation for the new construction of an apartment building in Brno. The proposed apartment building will be three-story, without a basement, and with a floor area of 305 m. Operationally, the building is divided into ten housing units. On the first floor, there are three apartments with layouts of 1+KK, 2+KK, and 3+KK. One of the apartments with a 2+KK layout is designed as barrier-free. The first floor is further equipped with a utility room, cellar cubicles, a room designated for cleaning, and a pram room. The elevator shaft is made of reinforced concrete with a thickness of 200 mm and is separated from the building by basalt wool with a thickness of 25 mm. The shaft is coated with a dust-free paint and is equipped with a hydraulic elevator, which is not intended for fire evacuation. On the second floor, there are a total of four apartments. Two are designed as 2+KK, while the other two apartments have a 3+KK layout. On the third floor, there are three apartments. One of them is designed as above-standard with a usable area of 148 m. The load-bearing structural system will be solved as masonry made of ceramic blocks, which will be placed on foundation strips of plain concrete. The ceiling structures are designed as monolithic reinforced concrete slabs with a thickness of 250 mm. The balcony slabs are designed as an embedded reinforced concrete cantilever with a slope of 3%. The roof is designed as a walkable flat structure, which has an integrated vegetative layer. The building is thermally insulated with contact basalt wool with a thickness of 160 mm.
Description
Keywords
bytový dům, novostavba, byt, plochá vegetační střecha, zděný systém, Porotherm, kontaktní zateplení ETICS, provětrávaná fasáda, nepodsklepený, základové pásy, asfaltové pásy, balkóny, apartment building, new building, apartment, flat green roof, masonry system, Porotherm, contact thermal insulation ETICS, ventilated facade, without a basement, foundation strips, asphalt strips, balconies
Citation
ŠTEPANOVSKÝ, S. Bytový dům [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Pozemní stavby
Comittee
doc. Ing. Miloš Lavický, Ph.D. (místopředseda)
Ing. Marie Rusinová, Ph.D. (člen)
Ing. Lubor Kalousek, Ph.D. (člen)
Ing. arch. Ivana Utíkalová, Ph.D. (člen)
doc. Ing. Agnes Iringová, Ph.D. (předseda)
Date of acceptance
2024-06-11
Defence
Student si připravil prezentaci své závěrečné práce s názvem Bytový dům. Součástí prezentace byla lokalizace objektu, základní popis objektu, konstrukční, dispoziční a architektonické řešení s vizualizacemi. Student si připravil odpovědi na otázky oponenta, které byly zahrnuty do prezentace.
Doplňující otázky zkušební komise:
- jaký typ PUR pěny bude použit při instalaci vstupních dveří?
Student s dokonalým přehledem zaujímal odborná stanoviska ke všem připomínkám oponenta a výborně reagoval i na všechny otázky členů komise, které byly k obhajované práci položeny.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení