Optimierung eines FE-Modells auf Grundlage einer experimentellen Modalanalyse.
Loading...
Date
Authors
Hermsdorf, Nathanael
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Znalosti o dynamických vlastnostech jsou základní předpoklady pro bezpečný provoz moderních výrobních strojů. Získání numerických metod ke zprostředkování dynamických vlastností stoupají na významu. Výpočet komplexních struktur je přesto možný pouze s nedostačující přesností. Pro výpočet již vznikajících mechanických systémů nabízí strukturní optimalizace možné zlepšení analytického přístupu. V rámci předložené práci je jedna taková strukturní optimalizace provedena na příkladu konceptu stroje s hybridní kinematikou “Scherenkinematik“. Přitom jsou nejdříve vyhodnoceny výsledky experimentální modální analýzy, zjištění modálních parametrů a odvození možné modifikace struktury. V druhé části následuje sestavení náhradního FE-modelu stroje v programu ANSYS Mechanical. Optimalizace struktury je provedena následně pomocí spojení program°u ANSYS a FEMtools. Z toho byly sestaveny dva optimalizační přístupy, které byly dále zpracovány. Ukázalo se, že jak s tak také bez spojitého omezení prostoru hledaných pro párování tvar kmitu, nebylo dosaženo žádné zlepšení korelace analytického a experimentálního modelu. Z výsledků optimalizace lze usoudit, že průběh a výsledky optimalizace jsou závislé od kvality výchozího modelu, vybraného přístupu optimalizace tak jako využité metody k přizpůsobení parametrů. Přitom je program FEMtools jen podmíněně určen pro strukturní analýzu silně spojených mechanických struktur a to pro nasazenou citlivosti analýzu.
Knowledge about the dynamic behaviour is a basic condition for a secure operation of modern machine tools. Hence numerical methods predicting the dynamic properties are gaining in importance. Usually for complex and coupled structures, the results of dynamic property calculation are yet insufficient. Therefore Finite Element model updating is a tool to improve the hypothetical factor of the analysis. Within the present thesis Finite Element modelling is performed using the example of the “Scherenkinematik”, a machine tool based on hybrid-kinematics. Initially the results of an Experimental Modal Analysis are evaluated by identifying Modal parameters and deriving possible structural modifications. In the second part of the thesis, the machines Finite Element model is created using the FEA-Software ANSYS. Afterwards the Finite Element model updating is performed by coupling ANSYS and the CAE-Software FEMtools. Therefore two approaches are formulated and tracked. It turns out, that there is no improvement of the analytical and experimental models correlation, neighter with nor without a steady reduction of the search domain needed for mode coupling. It is reasoned, that the characteristics and the results of an Finite Element updating process are affected by the quality of the model at start time and the approach as well as the technique chosen for model updating and parameter modification. Therefore the CAE-Software FEMtools is suitable to only a limited extent for Finite Element updating of strongly coupled mechanical structures as a result of the sensitivity analysis used for parameter modification.
Knowledge about the dynamic behaviour is a basic condition for a secure operation of modern machine tools. Hence numerical methods predicting the dynamic properties are gaining in importance. Usually for complex and coupled structures, the results of dynamic property calculation are yet insufficient. Therefore Finite Element model updating is a tool to improve the hypothetical factor of the analysis. Within the present thesis Finite Element modelling is performed using the example of the “Scherenkinematik”, a machine tool based on hybrid-kinematics. Initially the results of an Experimental Modal Analysis are evaluated by identifying Modal parameters and deriving possible structural modifications. In the second part of the thesis, the machines Finite Element model is created using the FEA-Software ANSYS. Afterwards the Finite Element model updating is performed by coupling ANSYS and the CAE-Software FEMtools. Therefore two approaches are formulated and tracked. It turns out, that there is no improvement of the analytical and experimental models correlation, neighter with nor without a steady reduction of the search domain needed for mode coupling. It is reasoned, that the characteristics and the results of an Finite Element updating process are affected by the quality of the model at start time and the approach as well as the technique chosen for model updating and parameter modification. Therefore the CAE-Software FEMtools is suitable to only a limited extent for Finite Element updating of strongly coupled mechanical structures as a result of the sensitivity analysis used for parameter modification.
Description
Citation
HERMSDORF, N. Optimierung eines FE-Modells auf Grundlage einer experimentellen Modalanalyse. [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2008.
Document type
Document version
Date of access to the full text
Language of document
de
Study field
Stavba výrobních strojů a zařízení
Comittee
prof. Ing. Bohumil Bumbálek, CSc. (předseda)
doc. Ing. Ivan Vavřík, CSc. (místopředseda)
Dr.-Ing. Andreas Hirsch (člen)
doc. Ing. Vojtěch Mišun, CSc. (člen)
Ing. Vladimír Dokoupil, CSc. (člen)
prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng. (člen)
doc. Ing. Petr Blecha, Ph.D., FEng. (člen)
Date of acceptance
2008-06-10
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Přístup k plnému textu prostřednictvím internetu byl licenční smlouvou omezen na dobu 5 roku/let