Effect of Laser Remelting of Fe-Based Thermally Sprayed Coating on AZ91 Magnesium Alloy on Its Structural and Tribological Properties

dc.contributor.authorBuchtík, Martincs
dc.contributor.authorBřezina, Matějcs
dc.contributor.authorMrňa, Liborcs
dc.contributor.authorPalán, Marekcs
dc.contributor.authorFilipenský, Jancs
dc.contributor.authorDoležal, Pavelcs
dc.contributor.authorNečas, Davidcs
dc.contributor.authorFrýza, Josefcs
dc.contributor.authorKajánek, Danielcs
dc.contributor.authorWasserbauer, Jaromírcs
dc.contributor.authorDoskočil, Leošcs
dc.coverage.issue6cs
dc.coverage.volume13cs
dc.date.accessioned2023-11-22T12:54:39Z
dc.date.available2023-11-22T12:54:39Z
dc.date.issued2023-06-02cs
dc.description.abstractAn Fe-based coating was thermally sprayed onto the surface of AZ91 magnesium alloy via the High-Velocity-Oxygen-Fuel (HVOF) method. The thermally sprayed coating with a thickness of 530 ± 25 µm and a porosity of 0.7 ± 0.1% did not show any macrostructural defects and did not cause any degradation of the AZ91 alloy. Laser remelting of the surface layer of the sprayed coating resulted in the recrystallization of the structure and the disappearance of presented pores, splat boundaries, and other defects. This led to an increase in the hardness of the remelted layer from the original 535 ± 20 HV0.3 up to 625 ± 5 HV0.3. However, during the laser remelting at a laser power of 1000 W, stress cracking in the coating occurred. The tribological properties were evaluated by the ball-on-plate method under dry conditions. Compared to the uncoated AZ91 magnesium alloy, a higher value of friction coefficient (COF) was measured for the as-sprayed coating. However, there was a decrease in wear rate and weight loss. The remelting of the surface layer of the as-sprayed coating led to a further decrease in the wear rate and weight loss. Based on the obtained data, it has been shown that the application of laser-remelted thermally sprayed Fe-based coatings on AZ91 Mg alloy improves hardness and tribological properties compared to bare Mg alloy and as-sprayed Fe-based coatings.en
dc.formattextcs
dc.format.extent1-16cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationCoatings, MDPI. 2023, vol. 13, issue 6, p. 1-16.en
dc.identifier.doi10.3390/coatings13061033cs
dc.identifier.issn2079-6412cs
dc.identifier.orcid0000-0003-4949-8092cs
dc.identifier.orcid0000-0003-4252-696Xcs
dc.identifier.orcid0000-0002-3928-5619cs
dc.identifier.orcid0000-0001-9282-0134cs
dc.identifier.orcid0000-0002-3843-8732cs
dc.identifier.orcid0000-0002-0484-2788cs
dc.identifier.orcid0000-0001-8927-1875cs
dc.identifier.orcid0000-0002-9584-9191cs
dc.identifier.other183965cs
dc.identifier.researcheridAAE-7994-2019cs
dc.identifier.researcheridAAE-1012-2020cs
dc.identifier.researcheridI-7816-2014cs
dc.identifier.researcheridG-3211-2015cs
dc.identifier.researcheridH-8743-2017cs
dc.identifier.researcheridAAE-9503-2019cs
dc.identifier.scopus57191887028cs
dc.identifier.scopus57201179935cs
dc.identifier.scopus36839379300cs
dc.identifier.scopus56635672600cs
dc.identifier.scopus57191710813cs
dc.identifier.scopus49864860600cs
dc.identifier.scopus55194711000cs
dc.identifier.urihttp://hdl.handle.net/11012/213596
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofCoatings, MDPIcs
dc.relation.urihttps://www.mdpi.com/2079-6412/13/6/1033cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2079-6412/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectAZ91en
dc.subjectmagnesium alloyen
dc.subjectHVOF coatingen
dc.subjectlaser remeltingen
dc.subjecttribological propertiesen
dc.subjectwear behavioren
dc.titleEffect of Laser Remelting of Fe-Based Thermally Sprayed Coating on AZ91 Magnesium Alloy on Its Structural and Tribological Propertiesen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-183965en
sync.item.dbtypeVAVen
sync.item.insts2023.11.22 13:54:38en
sync.item.modts2023.11.22 04:14:58en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav konstruovánícs
thesis.grantorVysoké učení technické v Brně. Fakulta chemická. Ústav chemie materiálůcs
Files