Rozbor svařování třením v automobilovém průmyslu
Loading...
Date
Authors
Čurda, Jakub
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Práce se zabývá aplikací svařování třením v automobilovém průmyslu, jmenovitě při výrobě táhel pro nákladní automobily ve firmě THK RYTHM AUTOMOTIVE CZECH, a.s., a ověřením vlastností svarového spoje. V rozboru součásti jsou uvedeny a rozebrány veškeré relativní informace týkající se výroby komponent pro táhlo a výroby samotného táhla. Teoretická část se věnuje rozboru svařování třením a jeho mechanismů, s ohledem na historický vývoj a uplatnění této metody. V experimentální části jsou za pomocí materiálových zkoušek ověřeny mechanické vlastnosti materiálu svaru, bylo zde využito tahové zkoušky, měření tvrdosti a makroskopického pozorování. Z výsledků těchto testů jsou následně vyvozeny závěry pro aplikaci táhla v praxi a jeho výrobní proces.
This thesis focuses on aplication of friction welding in automotive industry, namely in the production of radius rods used in axels of heavy duty commercial vehicles by the THK RYTHM AUTOMOTIVE CZECH, a.s. company, and the verifycation of preperties of the weld. The breakdown for the rod consist of all the information on the manufacturing of the components the rod consist of, as well as information on the welding process. The theoretical part of this thesis focuses on analysis of friction weding and its mechanisms, with emphasis on the evolution and application of this style of welding. Main focus of the experimental section is verification of mechanical properties of the weld, this is done using a tensile strenght test, microscopic observation and hardness mesuring. The data collected using these tests is then utilized to form a conclusion on the practical application of this method and the friction welding process.
This thesis focuses on aplication of friction welding in automotive industry, namely in the production of radius rods used in axels of heavy duty commercial vehicles by the THK RYTHM AUTOMOTIVE CZECH, a.s. company, and the verifycation of preperties of the weld. The breakdown for the rod consist of all the information on the manufacturing of the components the rod consist of, as well as information on the welding process. The theoretical part of this thesis focuses on analysis of friction weding and its mechanisms, with emphasis on the evolution and application of this style of welding. Main focus of the experimental section is verification of mechanical properties of the weld, this is done using a tensile strenght test, microscopic observation and hardness mesuring. The data collected using these tests is then utilized to form a conclusion on the practical application of this method and the friction welding process.
Description
Citation
ČURDA, J. Rozbor svařování třením v automobilovém průmyslu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
doc. Ing. Zdeněk Lidmila, CSc. (předseda)
Ing. Eva Peterková, Ph.D. (místopředseda)
Ing. Michaela Císařová, Ph.D. (člen)
Ing. Jaroslav Kubíček, IWE (člen)
Ing. Marian Sigmund, Ph.D., IWE (člen)
Ing. Marek Štroner, Ph.D. (člen)
Date of acceptance
2023-06-13
Defence
Student prezentoval komisi svou závěrečnou práci, její výstupy a závěry a zodpověděl dotazy oponenta. Dále byly studentovi položeny následující dotazy:
1. Proč se při zalisování táhla s čepem využívají díly vyrobené odléváním? (otázka byla plně zodpovězena)
2. Jaké nedestruktivní zkoušky povrchových vad by jste využil? (otázka byla plně zodpovězena)
3. Dalo by se v tomto případě využít svařování odporem? (otázka byla plně zodpovězena)
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení