Asfaltové směsi stmelené polymerem modifikovanými asfalty s vysokým obsahem R-materiálu
Loading...
Date
Authors
Sachr, Jiří
ORCID
Advisor
Referee
Mark
P
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Cílem této disertační práce je vytvoření návrhů na úpravy požadavků pro dávkování R-materiálu do asfaltových směsí typu asfaltový beton, které jsou uvedeny v české technické normě ČSN 73 6121 – Stavba vozovek – Hutněné asfaltové vrstvy – Provádění a kontrola shody, především v její příloze E – Národní požadavky pro směsi typu AC (asfaltový beton) vyráběné podle ČSN EN 13108-1 ed. 2. Díky této revizi budou v praxi výrazně rozšířeny možnosti využití R-materiálu při výrobě nových asfaltových směsí, což se pozitivně promítne do finanční a environmentální náročnosti dopravního stavitelství. Těmto návrhům předcházejí laboratorní testy prováděné na směsných asfaltových pojivech skládajících se z nově dávkovaných PMB a pojiv znovuzískaných z R-materiálu. Na základě získaných zkušeností z chování směsných pojiv byly navrženy a vyrobeny asfaltové směsi typu asfaltový beton pro obrusné vrstvy, na kterých byly provedeny další laboratorní zkoušky. Na základě výsledků všech těchto zkoušek byl vytvořen návrh na úpravu limitů dávkování R-materiálu do asfaltových směsí typu AC s polymerem modifikovanými asfalty.
The aim of this dissertation is to create proposals for modifying the requirements for dosing RAP into asphalt mixtures of the asphalt concrete type, which are listed in the Czech technical standard ČSN 73 6121 – Construction of roads – Compacted asphalt layers – Implementation and compliance control, especially in its Annex E – National requirements for mixtures of type AC (asphalt concrete) produced according to ČSN EN 13108-1 ed. 2. Thanks to this revision, the possibilities of using RAP in the production of new asphalt mixes will be significantly expanded in practice, which will have a positive impact on the financial and environmental demands of traffic construction. These proposals are preceded by laboratory tests performed on mixed asphalt binders consisting of newly added PMB and binders extracted from RAP. Based on the experience gained from the behavior of mixed binders, asphalt mixtures of the asphalt concrete type for wearing courses were designed and manufactured, on which further laboratory tests were performed. Based on the results of all these tests, a proposal was made to adjust the dosage limits of RAP into asphalt mixtures of the AC type with polymer modified binders.
The aim of this dissertation is to create proposals for modifying the requirements for dosing RAP into asphalt mixtures of the asphalt concrete type, which are listed in the Czech technical standard ČSN 73 6121 – Construction of roads – Compacted asphalt layers – Implementation and compliance control, especially in its Annex E – National requirements for mixtures of type AC (asphalt concrete) produced according to ČSN EN 13108-1 ed. 2. Thanks to this revision, the possibilities of using RAP in the production of new asphalt mixes will be significantly expanded in practice, which will have a positive impact on the financial and environmental demands of traffic construction. These proposals are preceded by laboratory tests performed on mixed asphalt binders consisting of newly added PMB and binders extracted from RAP. Based on the experience gained from the behavior of mixed binders, asphalt mixtures of the asphalt concrete type for wearing courses were designed and manufactured, on which further laboratory tests were performed. Based on the results of all these tests, a proposal was made to adjust the dosage limits of RAP into asphalt mixtures of the AC type with polymer modified binders.
Description
Citation
SACHR, J. Asfaltové směsi stmelené polymerem modifikovanými asfalty s vysokým obsahem R-materiálu [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Konstrukce a dopravní stavby
Comittee
prof. Ing. Marcela Karmazínová, CSc. (předseda)
doc. Ing. Katarina Bačová, Ph.D. (člen)
prof. Ing. Leonard Hobst, CSc. (člen)
doc. Ing. Lumír Miča, Ph.D. (člen)
Ing. Mojmír Nejezchleb (člen)
prof. Ing. Drahomír Novák, DrSc. (člen)
doc. Ing. Otto Plášek, Ph.D. (člen)
prof. Dr.techn. Ing. Michal Varaus (člen)
doc. Ing. Petr Hýzl, Ph.D. (člen)
Date of acceptance
2024-11-22
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení