Deformačně-napěťová analýza hřebové osteosyntézy stehenní kosti
Loading...
Date
Authors
Dalecký, Jan
ORCID
Advisor
Referee
Mark
D
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato diplomová práce se zabývá deformačně napěťovou analýzou stehenní kosti se zlomeninou a zavedeným rekonstrukčním hřebem. Analýza pracuje s modelem geometrie, který se skládá z modelu geometrie kosti, vytvořeného 3D skenováním pomocí telefonu a z modelu geometrie skutečného implantátu. Před samotnou deformačně napěťovou analýzou se však práce zaměřuje na teoretické pozadí - tedy na základní biomechaniku dolní končetiny a také silové působení v kyčelním kloubu, ze kterého pak vychází model zatížení. Rešerši na dané téma je věnována také velká pozornost, aby bylo co nejvíce porozuměno tématu. Deformačně napěťová analýza je pak srovnána s provedenými experimenty. Některé jednotlivé výsledky se mezi sebou pak shodují, jiné míň s uvedením, proč tomu tak je. Na závěr se práce zabývá tématem nad rámec zadání a to analýzou s viskoelastickým modelem kostní tkáně, který lépe popisuje chování spongiózní kosti.
This diploma thesis deals with the strain-stress analysis of a fractured femur with an inserted reconstruction nail. The analysis works with a geometry model, which consists of a bone geometry model created by 3D scanning using a phone and a geometry model of the actual implant. However, before the strain-stress analysis itself, the work focuses on the theoretical background - i.e. the basic biomechanics of the lower limb and also the force action in the hip joint, from which the load model is then based. Great attention is also paid to research on the given topic, so that the topic is understood as much as possible. The strain-stress analysis is then compared with the experiments performed. Some individual results then agree with each other, others less so, with an explanation of why this is the case. Finally, the work deals with a topic beyond the scope of the assignment, namely the analysis with a viscoelastic model of bone tissue, which better describes the behavior of cancellous bone.
This diploma thesis deals with the strain-stress analysis of a fractured femur with an inserted reconstruction nail. The analysis works with a geometry model, which consists of a bone geometry model created by 3D scanning using a phone and a geometry model of the actual implant. However, before the strain-stress analysis itself, the work focuses on the theoretical background - i.e. the basic biomechanics of the lower limb and also the force action in the hip joint, from which the load model is then based. Great attention is also paid to research on the given topic, so that the topic is understood as much as possible. The strain-stress analysis is then compared with the experiments performed. Some individual results then agree with each other, others less so, with an explanation of why this is the case. Finally, the work deals with a topic beyond the scope of the assignment, namely the analysis with a viscoelastic model of bone tissue, which better describes the behavior of cancellous bone.
Description
Citation
DALECKÝ, J. Deformačně-napěťová analýza hřebové osteosyntézy stehenní kosti [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2025.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Biomechanika
Comittee
prof. Ing. Jindřich Petruška, CSc. (člen)
prof. Ing. Jiří Burša, Ph.D. (člen)
prof. RNDr. Michal Kotoul, DrSc. (člen)
doc. Ing. Zdeněk Florian, CSc. (člen)
prof. RNDr. Matej Daniel, Ph.D. (člen)
Ing. László Iván, Ph.D. (člen)
prof. Ing. Jan Vimmr, Ph.D. (předseda)
doc. Ing. Tomáš Návrat, Ph.D. (místopředseda)
Date of acceptance
2025-06-09
Defence
Student ve vymezeném čase prezentoval svoji závěrečnou práci. Poté byly předneseny posudky a zodpovězeny dotazy oponenta. Následně byly pokládány další otázky vztahující se k diplomové práci:
Proč jste nepoužil volně dostupné modely geometrie a materiálu kosti?
Proč se použitým šroubům říká kompresní?
Po zodpovězení všech dotazů bylo vystoupení hodnoceno jako uspokojivé.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení