Analýza konstrukce části elektrického stroje
Loading...
Date
Authors
Fodor, Viktor
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Táto práca sa zaoberá optickou diagnostikou časti elektrického motora využitím 3D skenera. Popisuje konštrukciu elektrických asynchrónnych motorov, ich tepelné straty a možnosti chladenia ako aj chladiace systémy, ktoré takýto motor môže využívať. Približuje možnosti záznamu teploty a stručne vysvetľuje princíp 3D skenerov. Taktiež zoznamuje so simulačným programom ANSYS využívajúcim metódu konečných prvkov. Znázorňuje postup spracovania zdigitalizovaného objektu a následné simulácie ako aj porovnávanie výsledkov simulácií a meraní. Záver práce je venovaný analýze získaných výsledkov.
This thesis discusses the optical diagnostics of electrical motor parts using a 3D scanner. It describes the construction of electrical induction motors, their heat losses, cooling and refrigeration systems that may be used by such motors. It approaches the possibilities of heat recording and briefly explains the 3D scanner’s principal. It also introduces the simulation program ANSYS which uses the finite element method. This thesis shows the post processing of the digitalized object and the simulations and compares the simulation and measurement results. The final part is devoted to the analysis of the obtained results.
This thesis discusses the optical diagnostics of electrical motor parts using a 3D scanner. It describes the construction of electrical induction motors, their heat losses, cooling and refrigeration systems that may be used by such motors. It approaches the possibilities of heat recording and briefly explains the 3D scanner’s principal. It also introduces the simulation program ANSYS which uses the finite element method. This thesis shows the post processing of the digitalized object and the simulations and compares the simulation and measurement results. The final part is devoted to the analysis of the obtained results.
Description
Keywords
Asynchrónny motor, ventilátor, kostra, straty, 3D skener, triangulácia, metóda konečných prvkov, simulácia, tepelná simulácia, simulácia toku vzduchu, teplota, oteplenie, chladenie, vzduch, kryt ventilátora, rýchlosť vzduchu, prietok vzduchu, analýza., Asynchronous motor, fan, frame, losses, 3D scanner, triangulation, finite element method, simulation, thermal simulation, air flow simulation, temperature, temperature increasing, cooling, air, fan cap, air velocity, air flow, analysis.
Citation
FODOR, V. Analýza konstrukce části elektrického stroje [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2013.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Silnoproudá elektrotechnika a výkonová elektronika
Comittee
prof. Ing. Vítězslav Hájek, CSc. (předseda)
doc. Ing. Ondřej Vítek, Ph.D. (místopředseda)
Ing. Petr Huták, Ph.D. (člen)
doc. Ing. František Veselka, CSc. (člen)
Ing. Marcel Janda, Ph.D. (člen)
Ing. Jiří Valenta, Ph.D. (člen)
Date of acceptance
2013-06-11
Defence
Student obhajoval svoji diplomovou práci na téma "Analýza konstrukce části elektrického stroje". Prezentoval tvorbu modelu pomocí 3D skeneru a několik provedených laboratorních měření teplot na stroji. Porovnával naměřené teploty chlazeného a nechlazeného stroje. Předvedl simulaci toku vzduchu, porovnával model venilátoru získaný pomocí 3D skeneru a nakreslený v programu Inventor. Uvedl porovnání výsledků simulací chlazeného a nechlazeného stroje. Zodpověděl dotazy oponenta. Částečně zodpověděl dotazy komise.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení