Detektor kovů pro průmyslové využití
Loading...
Date
Authors
Stehno, Rostislav
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Cílem projektu bylo prozkoumat možnosti detekce kovů a navrhnout detektor kovů pro průmyslové využití. Během návrhu zařízení byly prostudovány různé metody pro detekci kovů a byla zvolena metoda impulsní detekce, která se stává nejvíce perspektivní metodou, díky zlepšování kvalit elektronických součástek. Po zkušenostech s první verzí zařízení bylo nutné celý návrh přepracovat. Hlavním cílem druhé verze zařízením je zvýšení výpočetního výkonu. Za tímto účelem je nutno zařízení vybavit mnohem výkonnějším mikrokontrolérem, což umožní mnohem lepší využití zobrazovacího displeje. Zařízení bude komunikovat s počítačem přes USB port. Vybaveno bude baterií, která umožní provoz po několik hodin. Zpracování naměřených dat bude probíhat také pomocí DFT díky čemu bude možno lépe analyzovat množství a druh kovů pod přístrojem.
The goal of this project is explore and study the ways of metal detecting and create a metal detector for industrial use. When the device were inventing, a lot of methods were studied and the impulse detect method were chosen as the most perspective way of metal detecting, thanks to a huge electronics parts possibilities. After experiences with preceding device was necessary to redesign it. Main target of this thesis is to increase the computing power of detector. For this purpose will device need a new microcontroller. Device will communicate with PC trough a USB port. The device will have a battery which allows device to run for a few hours. Processing of measured data will be make even with DFT which will lead to better analyze of mass and type of conductor under device.
The goal of this project is explore and study the ways of metal detecting and create a metal detector for industrial use. When the device were inventing, a lot of methods were studied and the impulse detect method were chosen as the most perspective way of metal detecting, thanks to a huge electronics parts possibilities. After experiences with preceding device was necessary to redesign it. Main target of this thesis is to increase the computing power of detector. For this purpose will device need a new microcontroller. Device will communicate with PC trough a USB port. The device will have a battery which allows device to run for a few hours. Processing of measured data will be make even with DFT which will lead to better analyze of mass and type of conductor under device.
Description
Citation
STEHNO, R. Detektor kovů pro průmyslové využití [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2016.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Elektronika a sdělovací technika
Comittee
prof. Ing. Lubomír Brančík, CSc. (předseda)
doc. Ing. Tomáš Frýza, Ph.D. (místopředseda)
doc. Ing. Lucie Hudcová, Ph.D. (člen)
doc. Ing. Tomáš Götthans, Ph.D. (člen)
Ing. Libor Boleček, Ph.D. (člen)
prof. Ing. Miloš Klíma, CSc. (člen)
Ing. Michal Pokorný, Ph.D. (člen)
Date of acceptance
2016-06-07
Defence
Student prezentuje výsledky a postupy řešení své diplomové práce. Následně odpovídá na dotazy vedoucího a oponenta práce a na dotazy členů zkušební komise.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení