IoT systém pro zahrádkáře
Loading...
Date
Authors
Mlčák, Petr
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Práce se zabývá návrhem a vytvořením meteostanice vhodné pro zahrádkáře. Vytvořené zařízení je schopno měřit teplotu, tlak, vlhkost vzduchu, množství srážek, rychlost a směr větru, UV index a rovněž teplotu a vlhkost půdy v několika hloubkách. Meteostanice je napájena z akumulátoru s pomocným dobíjením z fotovoltaického panelu. Práce je rozdělena do několika částí. V teoretické části jsou popsány jednotlivé fyzikální principy měření uvažovaných veličin. Následně je provedeno srovnání dostupných senzorů a poté proveden jejich finální výběr. Třetí část se zabývá návrhem a realizací hardwarového zapojení včetně vytvoření DPS. V této kapitole jsou rovněž navrženy držáky jednotlivých senzorů pro vytištění na 3D tiskárně, které jsou následně vytištěny. Čtvrtá část se zabývá problematikou vývoje software, který je blíže popsán. Nakonec je celá meteostanice sestavena, zapojena a je ověřena funkčnost všech komponent pomocí zasílání naměřených dat na Thingspeak.
The thesis deals with the design and creation of a weather station suitable for gardeners. The created device is able to measure temperature, pressure, humidity, amount of precipitation, wind speed and direction, UV index and also temperature and soil moisture at several depths. The weather station is powered by a battery with auxiliary charging from a photovoltaic panel. The thesis is divided into several parts. The theoretical part describes the individual physical principles of measurement of the considered physical quantities. Subsequently, a comparison of available sensors is made and then a final selection is made. The third part deals with the design and implementation of the hardware circuitry including the creation of the PCB. In this section, the holders of each sensor are also designed for printing on a 3D printer, which are then printed. The fourth section deals with software design issues, which is described in more detail. Finally, the whole weather station is assembled, wired and the functionality of all components is verified by sending the measured data to Thingspeak.
The thesis deals with the design and creation of a weather station suitable for gardeners. The created device is able to measure temperature, pressure, humidity, amount of precipitation, wind speed and direction, UV index and also temperature and soil moisture at several depths. The weather station is powered by a battery with auxiliary charging from a photovoltaic panel. The thesis is divided into several parts. The theoretical part describes the individual physical principles of measurement of the considered physical quantities. Subsequently, a comparison of available sensors is made and then a final selection is made. The third part deals with the design and implementation of the hardware circuitry including the creation of the PCB. In this section, the holders of each sensor are also designed for printing on a 3D printer, which are then printed. The fourth section deals with software design issues, which is described in more detail. Finally, the whole weather station is assembled, wired and the functionality of all components is verified by sending the measured data to Thingspeak.
Description
Citation
MLČÁK, P. IoT systém pro zahrádkáře [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2021.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Jiří Hošek, Ph.D. (předseda)
doc. Ing. Petr Číka, Ph.D. (místopředseda)
Ing. Milan Šimek, Ph.D. (člen)
Ing. František Urban, Ph.D. (člen)
Ing. Pavel Mašek, Ph.D. (člen)
Ing. Ondřej Krajsa, Ph.D. (člen)
Date of acceptance
2021-06-08
Defence
Student prezentoval výsledky své práce a komise byla seznámena s posudky.
Otázky:
Popište jakým způsobem máte připojené senzory vlhkosti k mikroprocesoru Attiny.
Jakým způsobem jste provedl zemnění FTP kabelu.
Jakou odhadujete životnost kapacitních senzorů, které jste použil v práci, případně jak byste životnost navýšil.
Student obhájil diplomovou práci a odpověděl na otázky členů komise a oponenta.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení