Vývoj vřeteníku pro horizontální vyvrtávací centrum
Loading...
Date
Authors
Raszka, Pavel
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce se zabývá návrhem konstrukce vřeteníku pro horizontální vyvrtávací centrum a dále konstrukcí frézovací hlavy. V první části práce je provedena rešerše v oblasti vyvrtávaček, hlavních částí vřeteníku vyvrtávaček a frézovacích hlav. Na základě této teoretické analýzy jsou zvoleny vstupní parametry pro výpočet napěťových, silových a momentových charakteristik vřeteníku. Následně je z těchto údajů proveden konstrukční návrh vřeteníku i frézovací hlavy formou 3D modelu.
The master´s thesis deals with the design of the headstock for the horizontal boring center and design of the milling head. In the first part of the thesis, a search is made in the field of boring machines, main parts of boring machine headstock and milling heads. Based on this theoretical analysis, the input parameters for the calculation of the tension, power and torque characteristics of the headstock are selected. Subsequently, the design of the headstock and milling head is done using a 3D model.
The master´s thesis deals with the design of the headstock for the horizontal boring center and design of the milling head. In the first part of the thesis, a search is made in the field of boring machines, main parts of boring machine headstock and milling heads. Based on this theoretical analysis, the input parameters for the calculation of the tension, power and torque characteristics of the headstock are selected. Subsequently, the design of the headstock and milling head is done using a 3D model.
Description
Citation
RASZKA, P. Vývoj vřeteníku pro horizontální vyvrtávací centrum [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2019.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Výrobní stroje, systémy a roboty
Comittee
prof. Ing. Václava Lašová, Ph.D. (předseda)
prof. Ing. Zdeněk Kolíbal, CSc. (místopředseda)
prof. Ing. Jan Mareček, DrSc. (člen)
Ing. Vladimír Bulej, Ph.D. (člen)
doc. Ing. Miroslav Maňas, CSc. (člen)
Ing. Petr Talanda (člen)
Date of acceptance
2019-06-21
Defence
Student odprezentovl svoji DP členům komise.
Student odpovídal na následující otázky členů komise:
Proč jsou pera na adaptéru vřetena pootočena o 120 st. a ne 180?
Jak máte uložena ložiska? Jaké bude použito mazání?
Jaká je oblast práce vřeteníku? Neohrozí vysoká teplota při obrábění těsnění gufery?
Odkud vzniká síla Fc?
Jaké je vyložení frézovací hlavy? Odkud jste vzal vstupní parametry pro technologické operace?
Jak je řešeno spojení duteého a pracovního vřetena?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení