Výroba pouzdra objemovým tvářením za studena
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Bakalářská práce je zaměřena na výrobu součásti objemovým tvářením za studena. Předmětem práce je návrh technologie výroby pouzdra o sériovosti 6 000 000 ks/rok pomocí protlačování a pěchování. K výrobě je použita austenitická korozivzdorná ocel X5CrNi18-10. Na základě simulací byla zvolena nejvhodnější geometrická konfigurace tvářecích operací. Celý výrobní postup se skládá z první dělící, dvou tvářecích a poslední obráběcí a rádlovaní operace. Na základě vypočtené tvářecí síly o velikosti 175,6 kN a potřebného výkonu o velikosti 425 W, byl zvolen tvářecí automat CHUN ZU CBF-83S. Současně je navržen nástroj a v závěru je provedeno technicko-ekonomické zhodnocení, jehož součástí je také výpočet kusové ceny při uvažování 15% zisku, která činí 1,24 Kč.
The bachelor thesis is focused on the production of a part by cold forming. The subject of the thesis is the design of the technology of production of a housing with a production rate of 6 000 000 pcs/year by extrusion and tamping. The austenitic stainless steel X5CrNi18-10 is used for the production. Based on simulations, the most suitable geometric configuration of the forming operations was selected. The whole production process consists of a first cutting, two forming and a last machining and radnishing operation. Based on the calculated forming force of 175,6 kN and the required power of 425 W, the CHUN ZU CBF-83S automatic forming machine was selected. At the same time, the tool is designed and in the end a techno-economic evaluation is carried out, which also includes the calculation of the piece price considering a 15% profit, which amounts to 1,24 CZK.
The bachelor thesis is focused on the production of a part by cold forming. The subject of the thesis is the design of the technology of production of a housing with a production rate of 6 000 000 pcs/year by extrusion and tamping. The austenitic stainless steel X5CrNi18-10 is used for the production. Based on simulations, the most suitable geometric configuration of the forming operations was selected. The whole production process consists of a first cutting, two forming and a last machining and radnishing operation. Based on the calculated forming force of 175,6 kN and the required power of 425 W, the CHUN ZU CBF-83S automatic forming machine was selected. At the same time, the tool is designed and in the end a techno-economic evaluation is carried out, which also includes the calculation of the piece price considering a 15% profit, which amounts to 1,24 CZK.
Description
Citation
KOUŘIL, J. Výroba pouzdra objemovým tvářením za studena [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
doc. Ing. Zdeněk Lidmila, CSc. (předseda)
Ing. Eva Peterková, Ph.D. (místopředseda)
Ing. Jan Řiháček, Ph.D. (člen)
Ing. Miroslav Jopek, Ph.D. (člen)
Ing. Michaela Císařová, Ph.D. (člen)
Ing. Vojtěch Staněk (člen)
Date of acceptance
2023-06-20
Defence
Student představil komisi svou práci, její výstupy a závěry a zodpověděl otázky oponenta. Dále byly studentovi položeny následující dotazy:
1. Jaký je důvod výrazného rozdílu hodnot tvářecích sil získaných analyticky a z numerické simulace? (otázka byla plně zodpovězena)
2. Jak je vytvořeno vroubkování na dílci? (otázka byla plně zodpovězena)
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení