Měření malých stejnosměrných napětí
Loading...
Date
Authors
Obšilová, Lucie
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Práce se zabývá měřením malých stejnosměrných napětí s využitím tří měřicích metod. První část práce popisuje jednotlivé metody. Jedná se o potenciometrickou metodu, referenční krokovou metodu a přímou metodu. Práce také popisuje kvantový etalon stejnosměrného napětí založený na Josephsonově jevu, který se použil ke kalibraci nanovoltmetru a Zenerovy reference. Teoretická část práce se dále zabývá vyhodnocením klíčového porovnání dat. Hlavním cílem práce je porovnání metod pro měření malých stejnosměrných napětí. Praktická část práce se zabývá realizací měření všemi metodami ve spolupráci s Českým metrologickým institutem v Brně. Naměřené hodnoty jsou zpracovány, včetně vyhodnocení nejistot. Závěrečná část práce se zaměřuje na porovnání měřicích metod. Určí se referenční hodnota porovnání klíčových dat a stupeň ekvivalence měření každé metody. Další část porovnání zahrnovala grafické porovnání metod. Konec práce obsahuje zhodnocení dosažených výsledků.
This thesis deals with low level DC voltage measurement by three methods. First part of this thesis describes each method. It is about potentiometric method, reference step method and direct method. This thesis also describes Josephson voltage standard which was used for calibration nanovoltmeter and Zener reference. The theoretical part of this thesis also deals with the evaluation of key comparison data. The main goal of this thesis is the comparison of methods used to measure low level DC voltage. The practical part of the thesis deals with the implementation of measurement with all methods in cooperation with Czech metrology institute. The measured values are processed including uncertainty evaluations. The final part of this thesis focuses on comparison of measurement methods. The key comparison reference value and the degree of equivalence of the measurement of each method are determined. Next part of comparison consisted of graphic comparison of methods. The end of the thesis contains evaluation of the achieved results.
This thesis deals with low level DC voltage measurement by three methods. First part of this thesis describes each method. It is about potentiometric method, reference step method and direct method. This thesis also describes Josephson voltage standard which was used for calibration nanovoltmeter and Zener reference. The theoretical part of this thesis also deals with the evaluation of key comparison data. The main goal of this thesis is the comparison of methods used to measure low level DC voltage. The practical part of the thesis deals with the implementation of measurement with all methods in cooperation with Czech metrology institute. The measured values are processed including uncertainty evaluations. The final part of this thesis focuses on comparison of measurement methods. The key comparison reference value and the degree of equivalence of the measurement of each method are determined. Next part of comparison consisted of graphic comparison of methods. The end of the thesis contains evaluation of the achieved results.
Description
Keywords
Stejnosměrné napětí, referenční kroková metoda, potenciometrická metoda, kvantový etalon stejnosměrného napětí na základě Josephsonova jevu, klíčové porovnání, referenční hodnota klíčového porovnání, stupeň ekvivalence, DC voltage, reference step method, potentiometric method, Josephson voltage standard, key comparison, key comparison reference value, degree of equivalence
Citation
OBŠILOVÁ, L. Měření malých stejnosměrných napětí [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2015.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Kybernetika, automatizace a měření
Comittee
prof. Dr. Ing. Alexandr Štefek, Dr. (předseda)
doc. Ing. Petr Beneš, Ph.D. (místopředseda)
Ing. Tomáš Macho, Ph.D. (člen)
Ing. Radek Štohl, Ph.D. (člen)
Ing. Libor Veselý, Ph.D. (člen)
Date of acceptance
2015-06-10
Defence
Student obhájil diplomovou práci.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení