Větrání obvodových plášťů budov z hlediska konstrukčních detailů pasivních a nízkoenergetických domů

but.jazykčeština (Czech)
but.programStavební inženýrstvícs
but.resultpráce byla úspěšně obhájenacs
dc.contributor.advisorMatějka, Liborcs
dc.contributor.authorŠagát, Erikcs
dc.contributor.refereeChybík,, Josefcs
dc.contributor.refereeBura,, Romancs
dc.date.createdcs
dc.description.abstractTato práce se zabývá konstrukcemi netransparentních provětrávaných fasád, prouděním vzduchu ve větrané mezeře a teplotním chováním opláštění při rozličných parametrech konstrukce a větrané mezery. Cílem práce je optimalizovat teplotní chování konstrukce v letním období, které souvisí s přehříváním obálky budovy. K dosažení cíle jsou použity numerické a experimentální metody zahrnující rozličné nastavení konstrukcí provětrávaných fasád. Jednotlivé nastavení jsou srovnávány a vyhodnocovány z hlediska rychlostí proudění vzduchu v mezeře a teploty vzduchu v mezeře a na povrchu konstrukce opláštění. Výsledkem jsou vyhodnocení vlivu jednotlivých typů vřazených odporů, nebo vlivu reflektance povrchů kolem větrané mezery. Část práce byla zpracována v návaznosti na projekt MPPF - Multifunctional Plug & Play Facade na TU Graz. Návaznost projektu na tuto práci se týká některých energeticky aktivních prvků fasád, u kterých sehrává teplota opláštění významnou roli z hlediska efektivity tohoto zařízení. Ve výsledcích práce je patentované řešení pasivního systému větrání opláštění budov a dutinový panel pro provětrávané fasády.cs
dc.description.abstractThe dissertation thesis is focused on non-transparent ventilated façade constructions, airflow in the ventilated cavity and the building envelope temperatures in relation with the different parameters of the construction and the ventilated cavity. The aim of this work is to optimize the temperature behavior of the building envelope during the summer season when the overheating is the most distinctive. The numerical and experimental methods with many different variants of façade constructions were used to investigation. The variants were compared and evaluated by the measured values of airflow speed in the ventilated cavity, temperature in the ventilated cavity and on the surfaces of constructions around the cavity. The result of the investigation is the evaluation of the influence of the airflow resistances or the reflectance of the surfaces around the ventilated cavity. Part of the thesis was formulated in relation with the project of MPPF - Multifunctional Plug & Play Facade during the internship at TU Graz. The efficiency of some parts of the energy active façade in this project depends on the temperature. The part of the results is the patented passive system for ventilation of building envelope and the patented cavity panel for ventilated facades.en
dc.description.markPcs
dc.identifier.citationŠAGÁT, E. Větrání obvodových plášťů budov z hlediska konstrukčních detailů pasivních a nízkoenergetických domů [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. .cs
dc.identifier.other105616cs
dc.identifier.urihttp://hdl.handle.net/11012/69154
dc.language.isocscs
dc.publisherVysoké učení technické v Brně. Fakulta stavebnícs
dc.rightsStandardní licenční smlouva - přístup k plnému textu bez omezenícs
dc.subjectprovětrávaná fasádacs
dc.subjectkonvekcecs
dc.subjectproudění vzduchucs
dc.subjectreflexní foliecs
dc.subjectventilated façadeen
dc.subjectconvectionen
dc.subjectairflowen
dc.subjectreflective foilen
dc.titleVětrání obvodových plášťů budov z hlediska konstrukčních detailů pasivních a nízkoenergetických domůcs
dc.title.alternativeVentilation of the building envelopeen
dc.typeTextcs
dc.type.driverdoctoralThesisen
dc.type.evskpdizertační prácecs
dcterms.modified2017-07-21-10:49:31cs
eprints.affiliatedInstitution.facultyFakulta stavebnícs
sync.item.dbid105616en
sync.item.dbtypeZPen
sync.item.insts2025.03.27 12:45:48en
sync.item.modts2025.01.15 12:25:18en
thesis.disciplinePozemní stavbycs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav pozemního stavitelstvícs
thesis.levelDoktorskýcs
thesis.namePh.D.cs
Files
Original bundle
Now showing 1 - 5 of 6
Loading...
Thumbnail Image
Name:
final-thesis.pdf
Size:
4.32 MB
Format:
Adobe Portable Document Format
Description:
file final-thesis.pdf
Loading...
Thumbnail Image
Name:
thesis-1.pdf
Size:
973.47 KB
Format:
Adobe Portable Document Format
Description:
file thesis-1.pdf
Loading...
Thumbnail Image
Name:
Posudek-Vedouci prace-37496.pdf
Size:
64.9 KB
Format:
Adobe Portable Document Format
Description:
file Posudek-Vedouci prace-37496.pdf
Loading...
Thumbnail Image
Name:
Posudek-Oponent prace-37474.pdf
Size:
311.6 KB
Format:
Adobe Portable Document Format
Description:
file Posudek-Oponent prace-37474.pdf
Loading...
Thumbnail Image
Name:
Posudek-Oponent prace-37497.pdf
Size:
139.5 KB
Format:
Adobe Portable Document Format
Description:
file Posudek-Oponent prace-37497.pdf
Collections