Studium chování betonu při působení vysokých teplot
Loading...
Date
Authors
Dvořáková, Michaela
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Diplomová práce je zaměřena na odolnost betonu exponovaného vysokým teplotám se zaměřením na problematiku explosivního odprýskávání a objasnění účinku polypropylenových vláken. Teoretická část je úvodem do problematiky explosivního odprýskávání, jeho mechanismu a majoritním vlivům podílejícím se na jeho vzniku. Popis procesů probíhajících ve struktuře betonu pod extrémním teplotním zatížením, velikost a distribuce pórů v betonu, tepelné zátěže, teplotní křivky a jejich aplikace, metody eliminace negativního chování betonu exponovaného tepelnému zatížení (pasivní a aktivní metody) a mechanismus účinku polypropylenových vláken (dále jen PP- vláken) je také zahrnuto v teoretické části. Cílem experimentální části je ověření účinku polypropylenových vláken o různém indexu toku taveniny (MFI) a dávkování vláken. Primárně byly porovnány zkušební vzorky s obsahem PP-vláken s referenčním vzorkem bez vláken. Sekundárně, vzorky se standardními PP-vlákny (s MFI 25) o dávkování 2,0 kg/m3 byly porovnány se vzorky s modifikovanými PP-vlákny (s MFI 2500) o dávkování 0,9 kg/m3. Fotogrammetrické snímky byly provedeny pro hodnocení a porovnání odprýskaného povrchu, hloubky odprýsknutí a vzniku trhlin. Teploty měknutí a tání modifikovaných a standardních PP-vláken byly stanoveny za použití vysokoteplotní mikroskopie. V druhé části experimentální práce byla stanovena permeability betonu za různých teplot a tlaků. Propustnost byla měřena při teplotě 20°C, 90°C, 150°C, 175°C, 200°C, 225°C a 250°C a součastně při tlaku 0,2; 0,4 a 0,6 MPa.
The aim of this diploma thesis is to focus on the resistance of concrete exposed to high temperatures especially with focus of resistance against explosive spalling as well as clarifying the mode of action of various types of polypropylene fibres. The theoretical part is an introduction to the issues of explosive spalling, its mechanisms and majority influencing factors. Further description of the processes taking place in the structure of concrete under extreme thermal load, distribution and size of pores in concrete, thermal load, temperature-time curves and their applications, methods of elimination of negative behaviour of concrete exposed to thermal loading (passive and active methods), mode of action of polypropylene fibres and more is also included in the theoretical part. The main aim of experimental part is to verify the function of polypropylene fibers of various Melt Flow Indexes (MFI) and dosage. Primarily, the test samples with content of the PP-fibers are compared to the reference sample without fibers. Secondarily, the samples with standard PP-fibers (with MFI 25) with dosage 2.0 kg/m3 are compared to samples with modified PP-fiber (with MFI 2500) of dosage 0.9 kg/m3. Photogrammetric images were used for evaluation and comparison of spalled surfaces and its depth. Determination of the softening temperature and melting point of the modified and standard PP-fibers was made by using a high temperature microscope video. The second part of the experimental work was to define concrete permeability at different temperatures and pressures. Permeability was measured at temperatures of 20°C, 90°C, 150°C, 175°C, 200°C, 225°C and 250°C and at pressure of 0.2, 0.4 and 0.6 MPa.
The aim of this diploma thesis is to focus on the resistance of concrete exposed to high temperatures especially with focus of resistance against explosive spalling as well as clarifying the mode of action of various types of polypropylene fibres. The theoretical part is an introduction to the issues of explosive spalling, its mechanisms and majority influencing factors. Further description of the processes taking place in the structure of concrete under extreme thermal load, distribution and size of pores in concrete, thermal load, temperature-time curves and their applications, methods of elimination of negative behaviour of concrete exposed to thermal loading (passive and active methods), mode of action of polypropylene fibres and more is also included in the theoretical part. The main aim of experimental part is to verify the function of polypropylene fibers of various Melt Flow Indexes (MFI) and dosage. Primarily, the test samples with content of the PP-fibers are compared to the reference sample without fibers. Secondarily, the samples with standard PP-fibers (with MFI 25) with dosage 2.0 kg/m3 are compared to samples with modified PP-fiber (with MFI 2500) of dosage 0.9 kg/m3. Photogrammetric images were used for evaluation and comparison of spalled surfaces and its depth. Determination of the softening temperature and melting point of the modified and standard PP-fibers was made by using a high temperature microscope video. The second part of the experimental work was to define concrete permeability at different temperatures and pressures. Permeability was measured at temperatures of 20°C, 90°C, 150°C, 175°C, 200°C, 225°C and 250°C and at pressure of 0.2, 0.4 and 0.6 MPa.
Description
Keywords
explosivní odprýskávání, polypropylenová vlákna, index toku taveniny (MFI), teplotní zatížení, uhlovodíková teplotní křivka, vysokopevnostní beton, permeabilita betonu, explosive spalling, polypropylene fibres, Melt Flow Index (MFI), thermal load, HydroCarbon temperature curve, high performance concrete, permeability of concrete
Citation
DVOŘÁKOVÁ, M. Studium chování betonu při působení vysokých teplot [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2014.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Stavebně materiálové inženýrství
Comittee
Date of acceptance
2014-02-04
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Přístup k plnému textu prostřednictvím internetu byl licenční smlouvou omezen na dobu 10 roku/let