On the Preparation of Advanced Materials via Pulsed Electric Current Sintering Procedures

Simple item page
dc.contributor.authorDíaz de la Torre, Sebastiancs
dc.contributor.authorČelko, Ladislavcs
dc.contributor.authorCasas Luna, Marianocs
dc.contributor.authorMontufar Jimenez, Edgar Benjamincs
dc.coverage.issue1cs
dc.coverage.volume258cs
dc.date.issued2017-01-01cs
dc.description.abstractA general overview on the processing of a series of advanced engineering materials, synthesized via pulsed-electric-current-sintering related techniques, and the similarities in between those techniques are introduced in this work. This paper is focused on two major techniques; namely, the Spark Plasma Extrusion (SPE) and Current Assisted Infiltration Sintering (CAIS), which in turn are derived from the Spark Plasma Sintering (SPS) technique, all widely used by this research group. Not only the geometry but also the microstructure of thus prepared specimens might vary depending on the selected technique. The resulting specimens can be under the forms of discs (flat or thick coin-like), rivets (enlarged cylindrical bars)-like and/or disclosing interpenetrated periodic networks with regular or irregular (either coin or rivet/screw)-like specimens, respectively. As for the CAIS technique, either 3D printed ceramic frameworks or naturally synthesized porous substrates (such as bone-like structures), can be infiltrated with virtually any metal or alloy. Among the series of produced materials we can include, for example: biomaterials such as: Ti- and Mg-hydroxyapatite, pure hydroxyapatite HA, composites, e.g., Al5083-CNT´s, just to name a few. The expanding possibilities of SPS, SPE and CAIS techniques are briefly indicated here.en
dc.formattextcs
dc.format.extent436-439cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationSolid State Phenomena. 2017, vol. 258, issue 1, p. 436-439.en
dc.identifier.doi10.4028/www.scientific.net/SSP.258.436cs
dc.identifier.isbn978-3-03835-626-4cs
dc.identifier.issn1012-0394cs
dc.identifier.orcid0000-0003-0264-3483cs
dc.identifier.orcid0000-0002-3449-1325cs
dc.identifier.orcid0000-0002-8122-4000cs
dc.identifier.other130382cs
dc.identifier.researcheridD-6870-2012cs
dc.identifier.researcheridAAB-5781-2021cs
dc.identifier.researcheridF-8040-2016cs
dc.identifier.scopus25621022900cs
dc.identifier.scopus57053564300cs
dc.identifier.scopus23397943300cs
dc.identifier.urihttp://hdl.handle.net/11012/68371
dc.language.isoencs
dc.publisherTrans Tech Publicationscs
dc.relation.ispartofSolid State Phenomenacs
dc.relation.urihttp://www.scientific.net/SSP.258.436cs
dc.rights(C) Trans Tech Publicationscs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1012-0394/cs
dc.subjectAdvanced materialsen
dc.subjectSpark Plasma Sintering SPSen
dc.subjectSpark Plasma Extrusion SPEen
dc.subjectCurrent Assisted Infiltration Sintering CAISen
dc.titleOn the Preparation of Advanced Materials via Pulsed Electric Current Sintering Proceduresen
dc.title.alternativePříprava pokročilých materiálů s využitím technik slinování elektrickým proudemcs
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionacceptedVersionen
sync.item.dbidVAV-130382en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 16:10:47en
sync.item.modts2025.01.17 16:53:54en
thesis.grantorVysoké učení technické v Brně. Středoevropský technologický institut VUT. Pokročilé instrumentace a metody pro charakterizace materiálůcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
On the Preparation of Advanced Materials viatorrecelcacasmon.pdf
Size:
1.13 MB
Format:
Adobe Portable Document Format
Description:
file On the Preparation of Advanced Materials viatorrecelcacasmon.pdf
Download
Collections
Pokročilé instrumentace a metody pro charakterizace materiálů