Návrh vřeteníku soustruhu
Loading...
Date
Authors
Sovadina, František
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce se zabývá návrhem a konstrukcí vřeteníků soustružnického centra. Cílem je navrhnout vřeteno o výkonu 20 kW a maximálních otáčkách 5000 1/min. Rešeršní část práce je zaměřena na popis základních parametrů vřeteníku a soustružnických center potřebných pro konstrukci vřeteníku a obsahuje rozbor dostupných vřeten na trhu. Další část práce se zabývá volbou a výpočtem řezných podmínek a potřebných parametrů. Analytické výpočty jsou následně ověřeny pomocí MKP analýzy. Nakonec byl vypracován 3D model a výkresová dokumentace vřeteníku.
The thesis deals with the design and construction of headstocks of a turning centre. The aim is to design a spindle with an output of 20 kW and a maximum speed of 5000 1/min. The research part of the thesis is focused on the description of the basic parameters of the headstock and turning centres needed for the construction of the headstock and contains an analysis of the available spindles on the market. The next part of the thesis deals with the selection and calculation of cutting conditions and the necessary parameters. Analytical calculations are then verified using FEM analysis. At the end of the thesis, a 3D model was developed and headstock drawing documentation.
The thesis deals with the design and construction of headstocks of a turning centre. The aim is to design a spindle with an output of 20 kW and a maximum speed of 5000 1/min. The research part of the thesis is focused on the description of the basic parameters of the headstock and turning centres needed for the construction of the headstock and contains an analysis of the available spindles on the market. The next part of the thesis deals with the selection and calculation of cutting conditions and the necessary parameters. Analytical calculations are then verified using FEM analysis. At the end of the thesis, a 3D model was developed and headstock drawing documentation.
Description
Citation
SOVADINA, F. Návrh vřeteníku soustruhu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2021.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Výrobní stroje, systémy a roboty
Comittee
prof. Dr. Ing. Jiří Marek, Ph.D., DBA, FEng. (předseda)
doc. Ing. Radek Knoflíček, Dr. (místopředseda)
Ing. Rostislav Huzlík, Ph.D. (člen)
Ing. František Bradáč, Ph.D. (člen)
Ing. Vladimír Dokoupil, CSc. (člen)
Date of acceptance
2021-06-16
Defence
V rámci obhajoby DP zaznělo:
Obsah.
Koncepční návrhy.
Ukázka multikriteriálního hodnocení.
Ukázka 3D modelu konstrukčního řešení.
Závěr.
Odpovídáno na dotazy oponenta:
1. otázka: Odpovězeno.
2. otázka: Odpovězeno.
3. otázka: Odpovězeno.
Doplňující dotazy členů komise.
Dotaz na osu C. K čemu slouží? Kde je snímač? Jak se vřeteno napolohuje do dané polohy? Diskuze ohledně bezvůlového chodu.
Kritika k mazání, znečištění, bezpečnosti. Odpověď: "Mazání vazelínou."
Otázka v DP - převodový poměr do rychla - jak je to správně? Diskuze ohledně přehození.
Výtka k multikriteriálnímu hodnocení.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení