Jeřábová kladnice - nosnost 16 t
but.committee | doc. Ing. Břetislav Mynář, CSc. (předseda) prof. Ing. Miroslav Rousek, CSc. (místopředseda) doc. Ing. Jiří Malášek, Ph.D. (člen) Ing. Jaroslav Kašpárek, Ph.D. (člen) Ing. Ondřej Blaťák, Ph.D. (člen) | cs |
but.defence | cs | |
but.jazyk | čeština (Czech) | |
but.program | Strojírenství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Škopán, Miroslav | cs |
dc.contributor.author | Straka, Miroslav | cs |
dc.contributor.referee | Malášek, Jiří | cs |
dc.date.accessioned | 2019-04-04T04:31:26Z | |
dc.date.available | 2019-04-04T04:31:26Z | |
dc.date.created | 2013 | cs |
dc.description.abstract | Cílem této bakalářské práce je návrh jeřábové kladnice s nosností 16 tun. Kladnice slouží ke zdvihání a přemisťování břemen ve středně těžkém provozu. Je vybavena jednoduchým hákem. Práce tedy obsahuje návrh řešení lanového převodu, pevnostní a rozměrové výpočty jednotlivých komponent a výkresovou dokumentaci sestavy, osy kladek a matice háku. | cs |
dc.description.abstract | The aim of this thesis is the design of crane hook block with a capacity of 16 tons. Pulley block used for lifting and moving loads in a medium heavy-duty use. It is equipped with a simple hook. The work, therefore, the proposal contains solutions rope transfer, strength and dimensional calculations of components and assembly drawings, axes, pulleys and nut hook. | en |
dc.description.mark | C | cs |
dc.identifier.citation | STRAKA, M. Jeřábová kladnice - nosnost 16 t [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2013. | cs |
dc.identifier.other | 63473 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/27697 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Jeřábová kladnice | cs |
dc.subject | lano | cs |
dc.subject | jeřáb | cs |
dc.subject | lanový převod | cs |
dc.subject | jeřábový hák | cs |
dc.subject | pevnostní výpočet | cs |
dc.subject | příčník | cs |
dc.subject | bočnice | cs |
dc.subject | lanová kladka | cs |
dc.subject | nosnost 16 tun | cs |
dc.subject | Crane hook block | en |
dc.subject | cable | en |
dc.subject | crane | en |
dc.subject | wire rope transfer | en |
dc.subject | crane hook | en |
dc.subject | strength calculation | en |
dc.subject | crossmember of the hook block | en |
dc.subject | side | en |
dc.subject | rope pulley | en |
dc.subject | lifting capacity 16 tons | en |
dc.title | Jeřábová kladnice - nosnost 16 t | cs |
dc.title.alternative | Crane Hook Block - Lifting Capacity 16 tons | en |
dc.type | Text | cs |
dc.type.driver | bachelorThesis | en |
dc.type.evskp | bakalářská práce | cs |
dcterms.dateAccepted | 2013-06-18 | cs |
dcterms.modified | 2013-06-24-10:37:30 | cs |
eprints.affiliatedInstitution.faculty | Fakulta strojního inženýrství | cs |
sync.item.dbid | 63473 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2021.11.12 20:06:50 | en |
sync.item.modts | 2021.11.12 19:29:17 | en |
thesis.discipline | Stavba strojů a zařízení | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav automobilního a dopravního inženýrství | cs |
thesis.level | Bakalářský | cs |
thesis.name | Bc. | cs |
Files
Original bundle
1 - 3 of 3
Loading...
- Name:
- final-thesis.pdf
- Size:
- 4.48 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- appendix-1.dwg
- Size:
- 316.59 KB
- Format:
- Unknown data format
- Description:
- appendix-1.dwg
Loading...
- Name:
- review_63473.html
- Size:
- 8.33 KB
- Format:
- Hypertext Markup Language
- Description:
- review_63473.html