Comparison of crack propagation rates in selected structural components made from AISI 304 grades: Three-point bending test

Simple item page
dc.contributor.authorJuhászová, Terezacs
dc.contributor.authorMiarka, Petrcs
dc.contributor.authorJindra, Danielcs
dc.contributor.authorKala, Zdeněkcs
dc.contributor.authorSeitl, Stanislavcs
dc.coverage.issue1cs
dc.coverage.volume42cs
dc.date.issued2023-01-03cs
dc.description.abstractThis study focuses on crack propagation rates of AISI 304 stainless-steel specimens made from selected structural components experimentally tested in three-point bending. Components of two productions loaded with constant force with selected stress ratio were submitted to cyclic loading in order to measure crack opening displacement. Experimentally obtained data were evaluated using 3D modelling in finite element modeling software intending to determine fracture mechanical parameters. The tool to describe fatigue behavior was Paris’ law, used to describe crack propagation in intermediate crack growth rate range. Paris–Erdogan equation was evaluated as a fitting of linear part of the graphical plot of crack growth rate with respect to the stress intensity range and material constants were gained from numerical description of the relation. Comparison of fatigue crack behavior in AISI 304 steel components of two productions was studied and evaluated.en
dc.formattextcs
dc.format.extent1090-1097cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationProcedia Structural Integrity. 2023, vol. 42, issue 1, p. 1090-1097.en
dc.identifier.doi10.1016/j.prostr.2022.12.138cs
dc.identifier.issn2452-3216cs
dc.identifier.orcid0000-0002-4103-8617cs
dc.identifier.orcid0000-0002-9512-2558cs
dc.identifier.orcid0000-0002-6873-3855cs
dc.identifier.orcid0000-0002-4953-4324cs
dc.identifier.other180795cs
dc.identifier.researcheridY-5612-2018cs
dc.identifier.researcheridA-7278-2016cs
dc.identifier.researcheridG-8592-2014cs
dc.identifier.scopus57195836397cs
dc.identifier.scopus7003615152cs
dc.identifier.scopus14059029400cs
dc.identifier.urihttp://hdl.handle.net/11012/213701
dc.language.isoencs
dc.publisherElseviercs
dc.relation.ispartofProcedia Structural Integritycs
dc.relation.urihttps://doi.org/10.1016/j.prostr.2022.12.138cs
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2452-3216/cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/cs
dc.subjectParis lawen
dc.subjectFEMen
dc.subjectAISI 304en
dc.subjectfatigueen
dc.subjectCMODen
dc.titleComparison of crack propagation rates in selected structural components made from AISI 304 grades: Three-point bending testen
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-180795en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:45:33en
sync.item.modts2025.01.17 18:39:13en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavební mechanikycs
thesis.grantorVysoké učení technické v Brně. . Ústav fyziky materiálů AV ČRcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
1s2.0S2452321622006953main.pdf
Size:
1.46 MB
Format:
Adobe Portable Document Format
Description:
1s2.0S2452321622006953main.pdf
Download
Collections
Ústav stavební mechaniky