The Acoustic Emission Parameters Obtained during Three-point Bending Test on Thermal-stressed Concrete Specimens

Simple item page
dc.contributor.authorTopolář, Liborcs
dc.contributor.authorKucharczyková, Barbaracs
dc.contributor.authorKocáb, Daliborcs
dc.contributor.authorPazdera, Lubošcs
dc.coverage.issue2017cs
dc.coverage.volume190cs
dc.date.issued2017-06-02cs
dc.description.abstractFire response of concrete structural members depends on thermal, mechanical, and deformation properties of concrete. These properties vary significantly with temperature and also depend on the composition and characteristics of the concrete batch mix as well as heating rate and other environmental conditions. Concrete structures could be exposed to extreme temperature conditions. Examples of such conditions are concrete foundations for launching rockets carrying spaceships, concrete structures in nuclear power stations or those accidentally exposed to fire, for instance in the case of tunnel fires. This paper analyses acoustic emission signals captured during three-point bending test on thermal-stressed concrete specimens. The method of acoustic emission is an experimental tool suitable for monitoring the failure processes in materials. The typical parameters of acoustic emission signal were identified during the acoustic emission records for different concrete specimens to further describe the under-the-stress behaviour and failure development. The amount of crack growth was continuously monitored using four acoustic emission sensorsmounted on the specimens.en
dc.formattextcs
dc.format.extent111-117cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationProcedia Engineering. 2017, vol. 190, issue 2017, p. 111-117.en
dc.identifier.doi10.1016/j.proeng.2017.05.315cs
dc.identifier.issn1877-7058cs
dc.identifier.orcid0000-0001-9437-473Xcs
dc.identifier.orcid0000-0002-7123-5099cs
dc.identifier.orcid0000-0002-8273-4571cs
dc.identifier.orcid0000-0002-9416-5644cs
dc.identifier.other135710cs
dc.identifier.researcheridE-9341-2018cs
dc.identifier.researcheridAAM-3121-2020cs
dc.identifier.researcheridAAW-8720-2020cs
dc.identifier.researcheridE-3469-2018cs
dc.identifier.scopus37051376500cs
dc.identifier.scopus36171769500cs
dc.identifier.scopus56721310500cs
dc.identifier.scopus6602266656cs
dc.identifier.urihttp://hdl.handle.net/11012/69342
dc.language.isoencs
dc.publisherElseviercs
dc.relation.ispartofProcedia Engineeringcs
dc.relation.urihttp://www.sciencedirect.com/science/article/pii/S1877705817324554cs
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1877-7058/cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/cs
dc.subjectacoustic emission methoden
dc.subjectthree-point bending testen
dc.subjectplain concreteen
dc.subjecthigh-temperature degradationen
dc.subjectmodulus of elasticityen
dc.titleThe Acoustic Emission Parameters Obtained during Three-point Bending Test on Thermal-stressed Concrete Specimensen
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-135710en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:43:55en
sync.item.modts2025.01.17 16:47:17en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav fyzikycs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavebního zkušebnictvícs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. AdMaS Divize MSHcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
1s2.0S1877705817324554main.pdf
Size:
689.8 KB
Format:
Adobe Portable Document Format
Description:
1s2.0S1877705817324554main.pdf
Download
Collections
Ústav fyziky
AdMaS Divize MSH
Ústav stavebního zkušebnictví